Skip to contentSkip to conversation

PCI-to-PCI bridge 21554?

DISCUSSION Pei-Jie Hong 3 participants 3 messages Nov 13, 2000

lore
Share & tools
lore
#0 lore raw

Hi everyone,
We are recently working on the PCI-to-PCI bridge 21554, which
is a non-transparent bridge. But we have some problem with it. Does anyone on this list ever do something with this bridge. Thanks.

Pei-Jie Hong

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 3 lines · Pei-Jie Hong

We are recently working on the PCI-to-PCI bridge 21554, which
is a non-transparent bridge. But we have some problem with it. Does anyone on this list ever do something with this bridge. Thanks.

I've been working with this bridge for a few months now, using it with an x86 PC on the primary side and a PowerPC SBC on the other. I've so far set up address translations across it, and used the I2O unit without any problems. What are you trying to do with the 21554, and what sort of board is it on?

- Adrian Cox, AG Electronics

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
In reply to Pei-Jie Hong
Quoted 3 lines · Pei-Jie Hong

We are recently working on the PCI-to-PCI bridge 21554, which
is a non-transparent bridge. But we have some problem with it. Does anyone on this list ever do something with this bridge. Thanks.

The Hard Hat Net drivers in the MontaVista kernel use the 21554 to emulate an Ethernet connection between multiple CompactPCI boards.

--
Joe Green <[email protected]>
MontaVista Software, Inc.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/