2.2.19/2.4.0-test and usbdevfs
Hi !
I use the usb bus. Mostly it is for a mouse and today, I have installed a scanner. I've read the documentation (yes!) in
/usr/src/linux/Documentation/usb/scanner.txt
There is a mention about the usbdevfs and an advice to add a line in /etc/fstab.
I have added the line "none /proc/bus/usb usbdevfs defaults 0 0", I expected to have access to /proc/bus/usb/devices without any extra manipulation.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/hda2 / ext2 defaults,errors=remount-ro 0 1 /dev/hdc1 none swap sw 0 0 proc /proc proc defaults 0 0 none /dev/shm shm defaults 0 0
none /proc/bus/usb usbdevfs defaults 0 0
At boot time, I get the messages :
Mounting local file systems...
modprobe: modprobe: Can't locate module shm
mount: fs type shm not supported by kernel
modprobe: modprobe: Can't locate module usbdevfs
mount: fs type usbdevfs not supported by kernel
Running dns-clean.
It is ok fr shm : I have the same fstab for both 2.2.19pre and 2.4.0-test and I boot 2.2.19pre... And the I've nothing in /proc/bus/usb
If I enter the command 'by hand' :
mount -t usbdevfs /proc/bus/usb /proc/bus/usb
The system accepts the command and I can do a cat /proc/bus/usb/devices :
[root@debian-f5ibh] ~ # mount -t usbdevfs /proc/bus/usb /proc/bus/usb [root@debian-f5ibh] ~ # cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=6100 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04b8 ProdID=010a Rev= 1.04 S: Manufacturer=EPSON S: Product=Perfection1640 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b4 ProdID=0001 Rev= 0.00 S: Manufacturer=Cypress Sem. S: Product=Cypress USB Mouse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl= 10ms
[root@debian-f5ibh] ~ # cat /proc/bus/usb/drivers
hid
hub
usbdevfs
Do I missed something in my usb configuration or in my modules managements ? Remark : The problem. is the same with 2.4.0-test13
System is :
-----------
Pentium 200MMX /64 Mb with :
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux debian-f5ibh 2.2.19pre1 #1 sam d�c 16 10:30:50 CET 2000 i586 unknown
Kernel modules 2.3.23 Gnu C 2.95.2 Binutils 2.9.5.0.41 Linux C Library 2.1.3 Dynamic linker ldd: version 1.9.11 Procps 2.0.6 Mount 2.10o Net-tools 2.05 Console-tools 0.2.3 Sh-utils 2.0 Modules Loaded af_packet scc ax25 parport_pc lp parport mousedev usb-uhci hid usbcore input autofs lockd sunrpc unix serial
.config file is (many lines removed) :
---------------------------------------
#CONFIG_EXPERIMENTAL=y
CONFIG_M586TSC=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_TSC=yCONFIG_MODULES=yCONFIG_KMOD=y
CONFIG_NET=yCONFIG_PCI=yCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_QUIRKS=yCONFIG_PCI_OPTIMIZE=yCONFIG_SYSVIPC=yCONFIG_SYSCTL=yCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_PARPORT=mCONFIG_PARPORT_PC=m
#
# USB support
#CONFIG_USB=mCONFIG_USB_DEVICEFS=yCONFIG_HOTPLUG=yCONFIG_USB_UHCI=mCONFIG_USB_SCANNER=mCONFIG_USB_HID=mCONFIG_INPUT_MOUSEDEV=mCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
------------------
Regards
Jean-Luc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines
modprobe: modprobe: Can't locate module usbdevfs
mount: fs type usbdevfs not supported by kernel
Add:
alias usbdevfs usbcore
to /etc/modules.conf
Tom
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/