Skip to contentSkip to conversation

Raid code panic with kernel compiled for i486

DISCUSSION Kaj-Michael Lang 2 participants 2 messages Jan 9, 2001

lore
Share & tools
lore
#0 lore raw

I was testing the 2.4.0 kernel and found out that when a kernel compiled for processors under P3 (i486, P2/Celeron) and booting it on a P3 the kernel
panics when it's tries to test different RAID5 xor algorithms.

The panic looks something like this:

...
raid5: measuring checksuming speed
8regs : 773.430 MB/sec
32regs : 562.356 MB/sec

invalid operand: 0000
CPU:    0
EIP:    0010:[<c0259c7d>]

...

I've tried with:
2.4.0, gcc 2.95.2
2.4.0-ac4, gcc 2.95.2
2.4.0 SMP, gcc 2.95.2
2.4.0 UP, egcs 1.1.2

Kaj-Michael Lang
[email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 8 lines · Kaj-Michael Lang

I was testing the 2.4.0 kernel and found out that when a kernel compiled for processors under P3 (i486, P2/Celeron) and booting it on a P3 the kernel
panics when it's tries to test different RAID5 xor algorithms.

The panic looks something like this:

Quoted 9 lines

...
raid5: measuring checksuming speed
8regs : 773.430 MB/sec
32regs : 562.356 MB/sec

invalid operand: 0000
CPU:    0
EIP:    0010:[<c0259c7d>]

...

Try 2.4.1-pre1. It's choking because SSE hasn't been enabled since it's compiled for a 486.

--

Brian Gerst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/