Crash using DRI with 2.4.0 and 2.4.1
Hi, I have a Matrox G200 card installed on an Ali motherboard.
Sometimes when I use any opengl program my box crashes. It is more likely that it will crash if I have used the xvideo extension or the matroxfb, but this is not a must, it simply increases the chance of a crash, which is very high anyway. I have tried both 2.4.0 and 2.4.1 kernels with Xfree 4.0.2 both with the same results.
Another problem I am having is that if I enable dri in X I can't see what I type in the fb.
Please, if someone reports to this, please include myself in the cc, as I am not suscribed to the list.
PD: excuse my horrible English, I write much better in Spanish ;-)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 8 lines · Miguel Rodriguez Perez
Hi, I have a Matrox G200 card installed on an Ali motherboard. Sometimes when I use any opengl program my box crashes. It is more likely that it will crash if I have used the xvideo extension or the matroxfb, but this is not a must, it simply increases the chance of a crash, which is very high anyway.
I have tried both 2.4.0 and 2.4.1 kernels with Xfree 4.0.2 both with the same results.
Are you sure you get the same results with 2.4.1? I'm in the exact same position (G200 on a Gigabyte GA5AX with ALi M1541/3). There was a patch to properly support AGP on these boards which went in between 2.4.0 and 2.4.1 which solved the problem for me (at least in 2.4.0; I haven't tested DRI throughly in 2.4.1 yet).
Signature · 6 lines
Adam Sampson [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
Quoted 12 lines · Adam Sampson
Quoted 8 lines · Miguel Rodriguez Perez
Hi, I have a Matrox G200 card installed on an Ali motherboard. Sometimes when I use any opengl program my box crashes. It is more likely that it will crash if I have used the xvideo extension or the matroxfb, but this is not a must, it simply increases the chance of a crash, which is very high anyway.
I have tried both 2.4.0 and 2.4.1 kernels with Xfree 4.0.2 both with the same results.
Quoted 7 lines
Are you sure you get the same results with 2.4.1? I'm in the exact same position (G200 on a Gigabyte GA5AX with ALi M1541/3). There was a patch to properly support AGP on these boards which went in between 2.4.0 and 2.4.1 which solved the problem for me (at least in 2.4.0; I haven't tested DRI throughly in 2.4.1 yet).
I'm sure it crashes with kernel 2.4.1 (I'm using it right now). Anyway, where can I find that patch, so I can try with a patched 2.4.0?
Thank you.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Adam Sampson wrote
Quoted 1 line
Are you sure you get the same results with 2.4.1?
Yes, I'm sure. In fact I just downloaded the 2.4.1 kernel to test if this was fixed.
Quoted 6 lines
I'm in the exact
same position (G200 on a Gigabyte GA5AX with ALi M1541/3). There was a patch to properly support AGP on these boards which went in between 2.4.0 and 2.4.1 which solved the problem for me (at least in 2.4.0; I haven't tested DRI throughly in 2.4.1 yet).
Can you send me that patch so I can test it.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/