_working_ rbootd for redhat
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello !
For the SCSI I have nothing fixed !
It works out of the box.
I have not sent any patch. I only tried it and it works.
So to all PA-RISC hackers, add the TRAP 18 there in the main stream !!
Ok, wonderful that your machine is also booting that way...
With friendly regards
Christoph
Quoted 23 lines · [email protected] wrote:
Hi there,
Quoted 1 line
I had already success with rbootd !
brilliant. It's pretty striaghtforward (when you know how!!)
Quoted 1 line
Here the kernel I always boot, and I can see the scsi disk !
excellent! thanks for this.
What needed fixing to get scsi to work?
have the patches to fix the scsi been comitted ?co-incidently as of about 10 minutes ago I finally got the box to boot! (yay!) with a kernel I built after adding the case 18: to
trap.cDo you know why this has not been comitted?
I added the extra case 18: to my linux-20010117.tar.gz and it works, but I checked out the latest source archive and the fix is not in there.thanks again,
Damian
[email protected]
Signature · 3 lines
------------------------------------------------------------------------- private: [email protected] company: [email protected]
Quoted 7 lines · Christoph Plattner
Hello !
For the SCSI I have nothing fixed !
It works out of the box.I have not sent any patch. I only tried it and it works.
So to all PA-RISC hackers, add the TRAP 18 there in the main stream !!
Yes, and no. we need a proper trap 18 handler that checks to see whether it's a page fault or a misaligned data reference, and calls the right handler. This should not be too hard to write, but i don't have time right now.
Signature · 1 line
Revolutions do not require corporate support.
Is it not possible to add the entry in the meantime with the well-known big triple X
/* XXX hack.... */
for those people doing the first hackings on such old machines ? Of course, some of these points will be forgotten....
I have not enough skills at the moment. I don't know the PA-RISC arch here good enough, and I also have to deal with the low level kernel code around the PA RISC here.
Cheers
Christoph
Quoted 22 lines · Matthew Wilcox
Quoted 7 lines · Christoph Plattner
Hello !
For the SCSI I have nothing fixed !
It works out of the box.I have not sent any patch. I only tried it and it works.
So to all PA-RISC hackers, add the TRAP 18 there in the main stream !!Yes, and no. we need a proper trap 18 handler that checks to see whether it's a page fault or a misaligned data reference, and calls the right handler. This should not be too hard to write, but i don't have time right now.
--
Revolutions do not require corporate support._______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
Signature · 4 lines
+--------V--------+ [email protected] | A L C A T E L | ----------------------------- +-----------------+ Phone: +43 1 27722 3706 T A S Fax: +43 1 27722 3955