Skip to contentSkip to conversation

Linux on a 823FADS

DISCUSSION Bruno R. Barreyra 4 participants 4 messages Feb 6, 2001

lore
Share & tools
lore
#0 lore raw

Hi.

I've been encharged with the (ungrateful) mission of making Linux run on a 823FADS board. I've already got the latest version of ppcboot (0.8.1) up and running from Flash, but I'm struggling to get Linux to boot.

How am I supposed to build the kernel? It seems the FADS port has long been abandoned. I'm trying to revive it, by including it back into the config and making necessary changes in order for the kernel to compile. Am I on the right track?

--
[]'s Bruno Renato Barreyra
[email protected]
[email protected]

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw

Quoting "Bruno R. Barreyra" <[email protected]>:

Quoted 11 lines

Hi.

I've been encharged with the (ungrateful) mission of making Linux run on a 823FADS board. I've already got the latest version of ppcboot (0.8.1) up and running from Flash, but I'm struggling to get Linux to boot.

How am I supposed to build the kernel? It seems the FADS port has long been abandoned. I'm trying to revive it, by including it back into the config and making necessary changes in order for the kernel to compile. Am I on the right track?

Hi Bruno,

I use mpc8xx-2.2.13 along with some patches from www.solutions4linux.de on a FADS823 board (Rev. Pilot from 1997). The Board has 2 MB flash and 8 MB dram. Linux runs from flash with an initial ramdisk but you can use a nfs-mounted root directory too. I use ppcboot 0.7.2 at the moment.

Christian

Dr.-Ing. Christian Schroeder
Institut fuer Mikroelektronik- und Mechatronik-Systeme Langewiesener Strasse 22
98693 Ilmenau

Telefon: +49 3677 678315
Telefax: +49 3677 678337
Mobil:   +49 173 5789172
e-mail:  [email protected]
www:     http://www.imms.de/~christi/cs.html
pgp:     finger [email protected]

-------------------------------------------------
This mail sent through IMP: imp.imms.de

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
In reply to Bruno R. Barreyra
Quoted 2 lines · Bruno R. Barreyra

How am I supposed to build the kernel? It seems the FADS port has long been abandoned. I'm trying to revive it,

You can find the FADS LSP on the MontaVista server in /pub/Area51. It is based on a 2.4.0-test2 kernel and works fine on the 860. All you need to do is update the SCC Ethernet configuration and you should be all set.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw

Helo Dan

I have a 860FADS + 2.4.0-test2 kernel (from FADS LSP on Area51) + ppcboot, and I can not get Linux run on my board.

Can you give me some help?

Thanks

Leonardo

Quoted 5 lines · Dan Malek
Quoted 2 lines · Bruno R. Barreyra

How am I supposed to build the kernel? It seems the FADS port has long been abandoned. I'm trying to revive it,

Quoted 8 lines

You can find the FADS LSP on the MontaVista server in /pub/Area51. It is based on a 2.4.0-test2 kernel and works fine on the 860. All you need to do is update the SCC Ethernet configuration and you should be all set.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/