2.4.1 and Adaptec Duralan aka Starfire.c
Hi All
I installed a Adaptec Quad Port Ethernet Adapter called Quartet64 and after compiling 2.4.1
with starfire support i got the following messages in syslog
after
ifconfig eth2 172.17.1.4 netmask 255.255.0.0 up
Feb 7 11:37:29 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 242749457 vs. ce781000 / ce781010. Feb 7 11:38:25 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 240822289 vs. ce5aa800 / ce5aa810. Feb 7 11:38:35 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 240820241 vs. ce5aa000 / ce5aa010. Feb 7 11:38:39 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 237467665 vs. ce277800 / ce277810. Feb 7 11:38:47 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 237465617 vs. ce277000 / ce277010. Feb 7 11:39:25 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 238573585 vs. ce385800 / ce385810. Feb 7 11:39:27 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 238571537 vs. ce385000 / ce385010. Feb 7 11:39:27 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 233326609 vs. cde84800 / cde84810. Feb 7 11:39:28 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 233324561 vs. cde84000 / cde84010. Feb 7 11:39:29 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 235980817 vs. ce10c800 / ce10c810. Feb 7 11:40:00 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 235978769 vs. ce10c000 / ce10c010. Feb 7 11:40:24 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 234903569 vs. ce005800 / ce005810. Feb 7 11:40:25 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 234901521 vs. ce005000 / ce005010. Feb 7 11:40:35 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 234897425 vs. ce004000 / ce004010. Feb 7 11:41:25 cerro kernel: eth2: Internal fault: The skbuff addresses do not match in netdev_rx: 234899473 vs. ce004800 / ce004810. Feb 7 11:41:28 cerro kernel: eth2: Internal fault: The skbuff addresses
do not match in netdev_rx: 234237969 vs. cdf63000 / cdf63010.
......
and so on
beside this messages everything is working as far as i can see but im a bit afraid going in production with
this machine..
so please give me some hints
stefan majer
x-cellent technologies gmbh
rosenkavalierplatz 5
81925 munich
germany
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines · Stefan Majer
Hi All
I installed a Adaptec Quad Port Ethernet Adapter called Quartet64 and after compiling 2.4.1
with starfire support i got the following messages in syslog
Quoted 6 lines
after
ifconfig eth2 172.17.1.4 netmask 255.255.0.0 up
Feb 7 11:37:29 cerro kernel: eth2: Internal fault: The skbuff addressesdo not match in
netdev_rx: 242749457 vs.ce781000/ce781010.
These are harmless, although very annoying. Use the driver from 2.4.1-acXX, it has this and other things fixed. Just copy starfire.c into your tree/drivers/net, it will work fine.
Ion
Signature · 6 lines
It is better to keep your mouth shut and be thought a fool,
than to open it and remove all doubt.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/