Skip to contentSkip to conversation

Bonding driver

DISCUSSION Chris Chabot 1 participant 1 message Feb 9, 2001

lore
Share & tools
lore
#0 lore raw

A few bugs still show up in the 2.4.x series with the bonding (drivers/net/bonding.c / bonding.0) driver. Ive tried all the below situations in both 2.4.0 and 2.4.1 (both clean/final versions), and on redhat's default 2.2.16enterprise kernel. the 2.2.16 kernel doesnt have any of the bugs described below, so it seems they are newly introduced in the 2.4 series at some point.. The system im testing on is a dual p3 600 (asus p2b-ds mainboard, 440 chipset), 512Mb ecc ram, raid0 4xide disks, 2x 3com 3c905b network cards connected to a 3com superstack III switch. The system runs redhat 7.0 with a clean self compiled 2.4.0/1 kernel.

Things that go wrong..

<BUG>

    ifdown bond0
    ifdown eth0
    --> kernel oops, system hard crash

system shutdown does the above as well, so as result i cant normaly shut down my servers anymore. This is very anoying for my fsck's on the 300Gb raid0.. and i fear for my data :)

<BUG>

    ping <some-addr>
    ifconfig
    --> packets go over the 2 interfaces
    ifdown bond0
    ifup bond0
    ping <same-addr>
    --> packets go -only- over eth0

<BEHAVIOUR>
ping -f <some-addr>
ifconfig
--> bond0 shows 0 rx packets, while eth0/1 do show rx's being
distributed over the 2 interfaces.

If there's more information i can provide, dont hesitate to ask. Pls cc me in replies since im not subscribed to linux-kernel.

-- Chris

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/