0.9.1-beta4 install bug
tried beta4 since the LVM_DIR_PREFIX replacement may have been fixed.
./configure --prefix=/opt/lvm/0.9.1
leaves only the man pages in the prefix dir, exec's still go to /sbin. this is bad news since it will blow off the entire LVM installation the next time i test an install.
checking ./configure --help:
<snip>
Directory and file names:
--prefix=PREFIX install architecture-independent files in
PREFIX
[/usr]
--exec-prefix=EPREFIX install architecture-dependent files in
EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR [PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR
[PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in
DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR
[PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM
run sed PROGRAM on installed program names
<snip>
so, prefix should set eprefix & friends which should leave the binaries in /opt/lvm/0.9.1/sbin, etc.
any chance this could be fixed for the next beta?
and/or was the LVM_DIR_PREFIX vs. hard-coded "/dev" entrys fixed in this one?
thanx.
Signature · 3 lines
Steven Lembark 2930 W. Palmer St.
Chicago, IL 60647
[email protected] 800-762-1582Hi,
Quoted 7 lines · * On Sunday, February 11, 2001 at 00:28, Steven Lembark wrote:
./configure --prefix=/opt/lvm/0.9.1leaves only the man pages in the prefix dir, exec's still go to /sbin. this is bad news since it will blow off the entire LVM installation the next time i test an install.
checking ./configure --help:
[..]
Quoted 6 lines
Directory and file names:
--prefix=PREFIX install architecture-independent files in
PREFIX[/usr]--exec-prefix=EPREFIX install architecture-dependent files in
EPREFIX
[...]
Quoted 2 lines
so, prefix should set eprefix & friends which should leave the binaries in
/opt/lvm/0.9.1/sbin, etc.
You have to set --exec-prefix either - --prefix does _not_ modify --exec-prefix as far as i can see.
Adalbert
Quoted 8 lines · Adalbert Michelic
Hi,
Quoted 5 lines · * On Sunday, February 11, 2001 at 00:28, Steven Lembark wrote:
./configure --prefix=/opt/lvm/0.9.1leaves only the man pages in the prefix dir, exec's still go to /sbin. this is bad news since it will blow off the entire LVM installation the next time i test an install.
[...]
Quoted 5 lines
Quoted 2 lines
so, prefix should set eprefix & friends which should leave the binaries in
/opt/lvm/0.9.1/sbin, etc.You have to set --exec-prefix either - --prefix does _not_ modify --exec-prefix as far as i can see.
if you want to change the behaviour do this
and rerun autoconf
(NOTE exec_prefix should be set to "", not "/", because it is used as in sbindir=${exec_prefix}/sbin )
^
configure.in Sun Feb 11 19:22:22 2001 renamed from configure.in.bluca Sat Feb 10 13:00:50 2001 +2 -2
@@ -74,8 +74,8 @@ statically. Default is dynamic linking], STATIC_LINK=$enableval, STATIC_LINK=no) dnl Mess with default exec_prefix -if [[ "x$exec_prefix" = xNONE ]]; - then exec_prefix="/"; +if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]]; + then exec_prefix=""; fi; dnl Checks for library functions.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
configure.in Sun Feb 11 19:22:22 2001 line 79
Quoted 12 lines
configure.in Sun Feb 11 19:22:22 2001 renamed from configure.in.bluca Sat Feb 10 13:00:50 2001 +2
-2@@ -74,8 +74,8 @@ statically. Default is dynamic linking], STATIC_LINK=$enableval, STATIC_LINK=no) dnl Mess with default exec_prefix -if [[ "x$exec_prefix" = xNONE ]]; - then exec_prefix="/"; +if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]]; + then exec_prefix=""; fi;
configure.in now looks like:
statically. Default is dynamic linking],
STATIC_LINK=$enableval, STATIC_LINK=no)
if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]];
then exec_prefix="";
fi;
make distclean;
./configure --prefix=/opt/lvm/0.91 --enable-jobs=2; make all install fails w/ errors updating /lib, /sbin, etc.
Done Library parts
make[3]: Leaving directory /scratch/LVM/0.9.1_beta4/tools/lib' make[3]: Entering directory /scratch/LVM/0.9.1_beta4/tools/lib' *** Installing liblvm.a and liblvm-10.so in /opt/lvm/0.91//lib ***
rm: cannot unlink `//lib/liblvm-10.so': Permission denied
rm: cannot unlink `//lib/liblvm-10.so.0.9': Permission denied
rm: cannot unlink `//lib/liblvm-10.so.0': Permission denied
rm: cannot unlink `//lib/liblvm.a': Permission denied make[3]: *** [install_this] Error 1
make[3]: Leaving directory `/scratch/LVM/0.9.1_beta4/tools/lib' make[2]: *** [install] Error 2
make[2]: Leaving directory /scratch/LVM/0.9.1_beta4/tools/lib' make[2]: Entering directory /scratch/LVM/0.9.1_beta4/tools/man8' make[3]: Entering directory /scratch/LVM/0.9.1_beta4/tools/man8' make[3]: Leaving directory /scratch/LVM/0.9.1_beta4/tools/man8'
<snip>
/opt/bin//install: //sbin: Operation not permitted /opt/bin//install: cannot remove old link to `//sbin/vgscan': Permission denied/opt/bin//install: cannot create regular file `//sbin/vgscan':
Permission denied
rm: cannot unlink //sbin/vgsplit': Permission denied /opt/bin//install: //sbin: Operation not permitted /opt/bin//install: cannot remove old link to //sbin/vgsplit':
Permission denied/opt/bin//install: cannot create regular file `//sbin/vgsplit':
Permission denied
and /opt/lvm/0.91 contains only the man directory.
still seems stuck on installing in /sbin
Signature · 3 lines
Steven Lembark 2930 W. Palmer St.
Chicago, IL 60647
[email protected] 800-762-1582Quoted 5 lines
configure.in now looks like:
statically. Default is dynamic linking],
STATIC_LINK=$enableval, STATIC_LINK=no)
Quoted 7 lines
if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]];
then exec_prefix="";
fi;make distclean;
./configure --prefix=/opt/lvm/0.91 --enable-jobs=2; make all install fails w/ errors updating /lib, /sbin, etc.
i requote myself:
if you want to change the behaviour do this
and rerun autoconf
^^^^^^^^^^^^^^^^^^
L.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
Quoted 4 lines
i requote myself:
if you want to change the behaviour do this
and rerun autoconf
^^^^^^^^^^^^^^^^^^
oops.
oddity: install blows up:
make[2]: Entering directory `/scratch/LVM/0.9.1_beta4/tools' *** Installing e2fsadm lvchange lvcreate lvdisplay lvextend lvmchange
lvmdisksca n lvmsadc lvmsar lvreduce
lvremove lvrename lvscan pvchange pvcreate pvdata
pvdi splay pvmove pvscan vgcfgbackup
vgcfgrestore vgchange vgck vgcreate vgdisplay
vg export vgextend vgimport vgmerge
vgmknodes vgreduce vgremove vgrename vgscan
vgs plit lvmcreate_initrd in/opt/lvm/0.91//sbin ***/opt/bin//install: /opt/lvm/0.91//sbin/e2fsadm: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvchange: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvcreate: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvdisplay: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/lvextend: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvmchange: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/lvmdiskscan: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/lvmsadc: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvmsar: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvreduce: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvremove: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvrename: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/lvscan: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/pvchange: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/pvcreate: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/pvdata: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/pvdisplay: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/pvmove: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/pvscan: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgcfgbackup: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/vgcfgrestore: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/vgchange: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgck: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgcreate: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgdisplay: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/vgexport: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgextend: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgimport: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgmerge: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgmknodes: Operation not permitted/opt/bin//install: /opt/lvm/0.91//sbin/vgreduce: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgremove: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgrename: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgscan: Operation not permitted /opt/bin//install: /opt/lvm/0.91//sbin/vgsplit: Operation not permitted make[2]: *** [install-bin] Error 1
make[2]: Target install_this' not remade because of errors. make[2]: Leaving directory /scratch/LVM/0.9.1_beta4/tools' make[1]: *** [install] Error 2
installing into a directory that
i own w/ mods 755:
drwxr-xr-x 2 lembark bin 4096 Feb 11 16:09
/opt/lvm/0.91//sbin
looks like it's gone out of its way to set the directory mods since /opt is suid bin and so is /opt/lvm/0.91:
drwxrwsr-x 5 lembark bin 4096 Feb 11 16:09 /opt/lvm/0.91
everything got put in the proper place but the ownership and mods are off (obviously i can fix these by hand):
1062 : dizzy : 0.9.1_beta4 $ ls -l /opt/lvm/0.91//sbin total 496
-r-xr-xr-x 1 lembark bin 14240 Feb 11 16:09 e2fsadm -r-xr-xr-x 1 lembark lembark 16812 Feb 11 16:09 lvchange -r-xr-xr-x 1 lembark lembark 25380 Feb 11 16:09 lvcreate -r-xr-xr-x 1 lembark lembark 9400 Feb 11 16:09 lvdisplay -r-xr-xr-x 1 lembark lembark 15632 Feb 11 16:09 lvextend -r-xr-xr-x 1 lembark lembark 7020 Feb 11 16:09 lvmchange -r-xr-xr-x 1 lembark lembark 9112 Feb 11 16:09 lvmdiskscan -r-xr-xr-x 1 lembark lembark 7520 Feb 11 16:09 lvmsadc -r-xr-xr-x 1 lembark lembark 6872 Feb 11 16:09 lvmsar -r-xr-xr-x 1 lembark lembark 14296 Feb 11 16:09 lvreduce -r-xr-xr-x 1 lembark lembark 12868 Feb 11 16:09 lvremove -r-xr-xr-x 1 lembark lembark 13728 Feb 11 16:09 lvrename -r-xr-xr-x 1 lembark lembark 9876 Feb 11 16:09 lvscan -r-xr-xr-x 1 lembark lembark 11652 Feb 11 16:09 pvchange -r-xr-xr-x 1 lembark lembark 12092 Feb 11 16:09 pvcreate -r-xr-xr-x 1 lembark lembark 11768 Feb 11 16:09 pvdata -r-xr-xr-x 1 lembark lembark 10064 Feb 11 16:09 pvdisplay -r-xr-xr-x 1 lembark lembark 17736 Feb 11 16:09 pvmove -r-xr-xr-x 1 lembark lembark 10216 Feb 11 16:09 pvscan -r-xr-xr-x 1 lembark lembark 7620 Feb 11 16:09 vgcfgbackup -r-xr-xr-x 1 lembark lembark 13152 Feb 11 16:09 vgcfgrestore -r-xr-xr-x 1 lembark lembark 19244 Feb 11 16:09 vgchange -r-xr-xr-x 1 lembark lembark 9748 Feb 11 16:09 vgck -r-xr-xr-x 1 lembark lembark 17688 Feb 11 16:09 vgcreate -r-xr-xr-x 1 lembark lembark 11724 Feb 11 16:09 vgdisplay -r-xr-xr-x 1 lembark lembark 10456 Feb 11 16:09 vgexport -r-xr-xr-x 1 lembark lembark 12672 Feb 11 16:09 vgextend -r-xr-xr-x 1 lembark lembark 15892 Feb 11 16:09 vgimport -r-xr-xr-x 1 lembark lembark 13652 Feb 11 16:09 vgmerge -r-xr-xr-x 1 lembark lembark 7788 Feb 11 16:09 vgmknodes -r-xr-xr-x 1 lembark lembark 13440 Feb 11 16:09 vgreduce -r-xr-xr-x 1 lembark lembark 10048 Feb 11 16:09 vgremove -r-xr-xr-x 1 lembark lembark 13688 Feb 11 16:09 vgrename -r-xr-xr-x 1 lembark lembark 10960 Feb 11 16:09 vgscan -r-xr-xr-x 1 lembark lembark 16052 Feb 11 16:09 vgsplit
any reason that the install has to set the ownership & mods? i don't remember anything in the code that explicitly checks file ownership (vs euid of proc execing them), but may have missed something.
Signature · 3 lines
Steven Lembark 2930 W. Palmer St.
Chicago, IL 60647
[email protected] 800-762-1582Quoted 6 lines · Steven Lembark
Quoted 5 lines
i requote myself:
if you want to change the behaviour do this
and rerun autoconf
^^^^^^^^^^^^^^^^^^
Quoted 7 lines
oops.
any reason that the install has to set the ownership & mods? i don't remember anything in the code that explicitly checks file ownership (vs euid of proc execing them), but may have missed something.
sigh,
kernel/Makefile renamed from kernel/Makefile.bluca.orig +3 -3
@@ -47,7 +47,7 @@ install-module: lvm.o rm -f $(LVM_DEST) - install -o root -g root -m 644 lvm.o $(LVM_DEST) + install -m 644 lvm.o $(LVM_DEST) rm -f /dev/lvm; mknod /dev/lvm c $(LVM_MAJOR) 0; chmod 640 /dev/lvm remove-module: lvm.o
@@ -88,8 +88,8 @@ then \ cp -p $(KSYMS_DEST) $(KSYMS_DEST).ORG; \ fi - install -o root -g root -m 555 $(LL_RW_BLK) $(LL_RW_BLK_DEST) - install -o root -g root -m 555 $(KSYMS) $(KSYMS_DEST) + install -m 755 $(LL_RW_BLK) $(LL_RW_BLK_DEST) + install -m 755 $(KSYMS) $(KSYMS_DEST) install_this: install-ll_rw_blk install-module
tools/man8/Makefile.in renamed from tools/man8/Makefile.in.bluca.orig +1 -1
@@ -40,7 +40,7 @@ @for f in $(ALL_MANUALS); \ do \ rm -f $(MAN8DIR)/$$f; \ - @INSTALL@ -D -o root -g root -m 444 $$f $(MAN8DIR)/$$f; \ + @INSTALL@ -D -m 644 $$f $(MAN8DIR)/$$f; \ done remove-man8:
tools/Makefile.in renamed from tools/Makefile.in.bluca.orig +2 -2
@@ -77,13 +77,13 @@ do \ rm -f ${sbindir}/$$f; \ @INSTALL@ -d ${sbindir}; \ - @INSTALL@ -o root -g root -m 555 -s $$f ${sbindir}/$$f; \ + @INSTALL@ -m 755 -s $$f ${sbindir}/$$f; \ done @for f in $(ALL_SCRIPTS); \ do \ rm -f ${sbindir}/$$f; \ @INSTALL@ -d ${sbindir}; \ - @INSTALL@ -o root -g root -m 555 $$f ${sbindir}/$$f; \ + @INSTALL@ -m 755 $$f ${sbindir}/$$f; \ done remove-bin: $(ALL_TARGETS) $(ALL_SCRIPTS)
configure.in renamed from configure.in.bluca.orig +2 -2
@@ -74,8 +74,8 @@ statically. Default is dynamic linking], STATIC_LINK=$enableval, STATIC_LINK=no) dnl Mess with default exec_prefix -if [[ "x$exec_prefix" = xNONE ]]; - then exec_prefix="/"; +if [[ "x$exec_prefix" = xNONE -a "x$prefix" = xNONE ]]; + then exec_prefix=""; fi; dnl Checks for library functions.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
Quoted 13 lines · Luca Berra
Quoted 8 lines · Adalbert Michelic
Hi,
Quoted 5 lines · * On Sunday, February 11, 2001 at 00:28, Steven Lembark wrote:
./configure --prefix=/opt/lvm/0.9.1leaves only the man pages in the prefix dir, exec's still go to /sbin. this is bad news since it will blow off the entire LVM installation the next time i test an install.
[...]
Quoted 3 lines
Quoted 2 lines
so, prefix should set eprefix & friends which should leave the binaries in
/opt/lvm/0.9.1/sbin, etc.
Quoted 7 lines
Quoted 2 lines
You have to set --exec-prefix either - --prefix does _not_ modify --exec-prefix as far as i can see.
if you want to change the behaviour do this
and rerun autoconf
(NOTEexec_prefixshould be set to "", not "/", because it is used as in sbindir=${exec_prefix}/sbin )
Hmm...does it matter? It never has for me...
Anywho, thanks for that patch; it's exactly what I was thinking would fix Steven's problem.
Signature · 18 lines
AJ Lewis Sistina Software Inc. Voice: 612-379-3951 1313 5th St SE, Suite 111 Fax: 612-379-3952 Minneapolis, MN 55414 E-Mail: [email protected] http://www.sistina.com Current GPG fingerprint = 3B5F 6011 5216 76A5 2F6B 52A0 941E 1261 0029 2648 Get my key at: http://www.sistina.com/~lewis/gpgkey (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys) -----Begin Obligatory Humorous Quote---------------------------------------- THE LESSER-KNOWN PROGRAMMING LANGUAGES #16: C- This language was named for the grade received by its creator when he submitted it as a class project in a graduate programming class. C- is best described as a "low-level" programming language. In fact, the language generally requires more C- statements than machine-code statements to execute a given task. In this respect, it is very similar to COBOL. -----End Obligatory Humorous Quote------------------------------------------
Quoted 2 lines · Steven Lembark
and/or was the
LVM_DIR_PREFIXvs. hard-coded "/dev" entrys fixed in this one?
Not yet. I changed this in a few places in the code, but haven't submitted a patch yet.
Cheers, Andreas
Signature · 3 lines
Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto,
\ would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert