block ioctl to read/write last sector
Michael E Brown ([email protected]) worte :
Quoted 8 lines · Manfred Spraul
Quoted 4 lines
I have one additional user space only idea:
have you tried raw-io? bind a raw device to the partition, IIRC raw-io is always in 512 byte units.That has been tried. No, it does not work. :-) Using Scsi-Generic is the only way so far found, but of course, it only works on SCSI drives.
Did you try scsi-emulation on IDE disks ?
Quoted 10 lines
Quoted 5 lines
Probably an ioctl is the better idea, but I'd use absolute sector numbers (not relative to the end), and obviously 64-bit sector numbers - 2 TB isn't that far away.
I was deliberately trying to limit the scope to avoid misuse. This is to work around a flaw in the current API, not to create a new API. Limiting access to only those blocks that would normally be inaccessible through the normal API seemed like the best bet to me.
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -
Quoted 6 lines · David Balazic
Michael E Brown ([email protected]) worte :
Quoted 2 lines
That has been tried. No, it does not work. :-) Using Scsi-Generic is the only way so far found, but of course, it only works on SCSI drives.
Did you try scsi-emulation on IDE disks ?
I think that scsi-emulation works only for ATAPI devices. CDROMs are normally ATAPI. HDs are normally just ATA. I don't think that would work, but I have not tried it, either.
--
Michael Brown
Linux Systems Group
Dell Computer Corp
Quoted 1 line · David Balazic
Did you try scsi-emulation on IDE disks ?
Don't be silly.
That emulation is from scsi-packet to atapi-packet.
Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------
ASL, Inc. Toll free: 1-877-ASL-3535 1757 Houret Court Fax: 1-408-941-2071 Milpitas, CA 95035 Web: www.aslab.com