Skip to contentSkip to conversation

"Unable to handle kernel paging request" x 3

DISCUSSION Alberto Bertogli 3 participants 4 messages Feb 21, 2001

lore
Share & tools
lore
#0 lore raw

This is the 3rd day in a row i got an oops.
The only difference this time was the machine had one postgresql running, with mailsnarf, vmstat, apache and inetd; without any load.

The oops (passed through ksymoops 2.4) is attached, with the dmesg.

Linux sol 2.4.1 #3 SMP Wed Feb 14 18:14:33 ARST 2001 i686 unknown The only module loaded is the megaraid.

Please ask if you need any other info.

Thanks,
Alberto

ksymoops 2.3.7 on i686 2.4.1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.1/ (default)
-m /boot/System.map (specified)

Unable to handle kernel paging request at virtual address 00009fac
*pde = 00000000
CPU:    1
EIP:    0010:[<c01071ec>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: c01071c0 ecx: c1228000 edx: c1228000
esi: c1228000 edi: c01071c0 ebp: 00000000 esp: c1229bf0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c1229000)

Stack: c010724e 00000000 00000000 00000000 c037d886 0000002b 00000000 c024126d
       00000000 00000006 00000007 00000000 00000000 c03e8a40 0000c000 c01e771e
       c1223000 00000001 00000000 00000000
Call trace: [<c010724e>] [<c024126d>] [<c01e771e>]
Code: c3 8d 76 00 fb c3 89 f6 fb ba 00 e0 ff ff 21 e2 b8 ff ff ff
Quoted 1 line
Quoted 1 line

EIP; c01071ec <default_idle+2c/34> <=====

Trace; c010724e <cpu_idle+3a/50>
Trace; c024126d <vgacon_cursor+1e9/1f4>
Trace; c01e771e <set_cursor+6e/84>
Code; c01071ec <default_idle+2c/34>
00000000 <_EIP>:
Code; c01071ec <default_idle+2c/34> <=====
0: c3 ret <=====
Code; c01071ed <default_idle+2d/34>
1: 8d 76 00 leal 0x0(%esi),%esi
Code; c01071f0 <default_idle+30/34>
4: fb sti
Code; c01071f1 <default_idle+31/34>
5: c3 ret
Code; c01071f2 <default_idle+32/34>
6: 89 f6 movl %esi,%esi
Code; c01071f4 <poll_idle+0/20>
8: fb sti
Code; c01071f5 <poll_idle+1/20>
9: ba 00 e0 ff ff movl $0xffffe000,%edx
Code; c01071fa <poll_idle+6/20>
e: 21 e2 andl %esp,%edx
Code; c01071fc <poll_idle+8/20>
10: b8 ff ff ff 00 movl $0xffffff,%eax

Kernel panic: Attemped to kill the idle task!

Linux version 2.4.1 (root@sol) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #3 SMP Wed Feb 14 18:14:33 ARST 2001 BIOS-provided physical RAM map:
BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 0000000007f00000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved)
BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved)
BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000fdba0
hm, page 000fd000 reserved twice.
hm, page 000fe000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: POWEREDGE APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is EISA
I/O APIC #1 Version 17 at 0xFEC00000.
Int: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID 1, APIC INT 00
Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 1, APIC INT 01
Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 1, APIC INT 02
Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 1, APIC INT 03
Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 1, APIC INT 04
Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 1, APIC INT 05
Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 1, APIC INT 06
Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 1, APIC INT 07
Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 1, APIC INT 08
Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 1, APIC INT 09
Int: type 0, pol 0, trig 0, bus 2, IRQ 0a, APIC ID 1, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 2, IRQ 0b, APIC ID 1, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 1, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 1, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 1, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 1, APIC INT 0f
Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 1, trig 1, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: BOOT_IMAGE=linux ro root=801
Initializing CPU#0
Detected 199.438 MHz processor.
Console: colour VGA+ 132x44
Calibrating delay loop... 397.31 BogoMIPS
Memory: 125404k/131072k available (1865k kernel code, 5280k reserved, 649k data, 212k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
CPU0: Intel Pentium Pro stepping 07
per-CPU timeslice cutoff: 1460.32 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 3000000
Getting ID: c000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 9
Booting processor 1/0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
CPU#1 (phys ID: 0) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 398.13 BogoMIPS
Stack at about c1229fbc
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium Pro stepping 07
CPU has booted.
Before bogomips.
Total of 2 processors activated (795.44 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 1 ... ok.
Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0 not connected.
..TIMER: vector=49 pin1=2 pin2=0
activating NMI Watchdog ... done.
number of MP IRQ sources: 16.
number of IO-APIC #1 registers: 16.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    0    0   0   0    1    1    71
 0a 003 03  0    0    0   0   0    1    1    79
 0b 003 03  1    1    0   0   0    1    1    81
 0c 003 03  0    0    0   0   0    1    1    89
 0d 000 00  1    0    0   0   0    0    0    00
 0e 003 03  1    1    0   0   0    1    1    91
 0f 003 03  1    1    0   0   0    1    1    99

IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 199.4369 MHz.
..... host bus clock speed is 66.4787 MHz.
cpu: 0, clocks: 664787, slice: 221595
CPU0<T0:664784,T1:443184,D:5,S:221595,C:664787>
cpu: 1, clocks: 664787, slice: 221595
CPU1<T0:664784,T1:221584,D:10,S:221595,C:664787>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf814d, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
Limiting direct PCI/PCI transfers.
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 83208kB/27736kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: enabling 8 loop devices
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
divert: not allocating divert_blk for non-ethernet device teql0
early initialization of device teql0 is deferred
NET4: Frame Diverter 0.46
Coda Kernel/Venus communications, v5.3.9, [email protected]
NTFS version 000607
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
divert: allocating divert_blk for eth0
eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:A0:C9:2D:E5:16, IRQ 14.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
divert: not allocating divert_blk for non-ethernet device shaper0
divert: not allocating divert_blk for non-ethernet device dummy0
divert: not allocating divert_blk for non-ethernet device bond0
Universal TUN/TAP device driver 1.3 (C)1999-2000 Maxim Krasnyansky
SCSI subsystem driver Revision: 1.00
(scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 1/10/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 422 instructions downloaded
(scsi1) <Adaptec AIC-7860 Ultra SCSI host adapter> found at PCI 1/11/0
(scsi1) Narrow Channel, SCSI ID=7, 3/255 SCBs
(scsi1) Downloading sequencer code... 422 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7880 Ultra SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7860 Ultra SCSI host adapter>
(scsi0:0:0:0) Synchronous at 20.0 Mbyte/sec, offset 8.
Vendor: QUANTUM Model: ATLAS IV 18 WLS Rev: 0909
Type: Direct-Access ANSI SCSI revision: 03
(scsi1:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: NEC Model: CD-ROM DRIVE:462 Rev: 1.14
Type: CD-ROM ANSI SCSI revision: 02
(scsi1:0:5:0) Synchronous at 10.0 Mbyte/sec, offset 15.

  Vendor: SONY      Model: TSL-9000          Rev: L006
  Type:   Sequential-Access                  ANSI SCSI revision: 02
  Vendor: SONY      Model: TSL-9000          Rev: L006
  Type:   Medium Changer                     ANSI SCSI revision: 02

Detected scsi tape st0 at scsi1, channel 0, id 5, lun 0
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 35885168 512-byte hdwr sectors (18373 MB) Partition check:
sda: sda1 sda2
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 3, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Detected scsi generic sg3 at scsi1, channel 0, id 5, lun 1, type 8
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192) IPv4 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device tunl0 GRE over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device gre0 ip_conntrack (1024 buckets, 8192 max)
ip_tables: (c)2000 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ip6_tables: (c)2000 Netfilter core team
registreing ipv6 mark target
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 212k freed
Adding Swap: 666688k swap-space (priority -1)
megaraid: v107 (December 22, 1999)
megaraid: found 0x101e:0x9010: in 01:0d.0
scsi2 : Found a MegaRAID controller at 0xe090, IRQ: 15
megaraid: Couldn't register I/O range!
megaraid: v107 (December 22, 1999)
megaraid: found 0x101e:0x9010: in 01:0d.0
scsi2 : Found a MegaRAID controller at 0xe090, IRQ: 15
megaraid: [U.75:1.44] detected 1 logical drives
scsi2 : AMI MegaRAID U.75 254 commands 16 targs 2 chans 8 luns
scsi2: scanning channel 1 for devices.
Vendor: DELL Model: 6UW BACKPLANE Rev: 7
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sg4 at scsi2, channel 0, id 6, lun 0, type 3
scsi2: scanning channel 2 for devices.
scsi2: scanning virtual channel for logical drives.
Vendor: MegaRAID Model: LD0 RAID5 8176R Rev: U.75
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi2, channel 2, id 0, lun 0 SCSI device sdb: 16744448 512-byte hdwr sectors (8573 MB)
sdb: sdb1
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
eth0: no IPv6 routers present
mailsnarf uses obsolete (PF_INET,SOCK_PACKET)
device eth0 entered promiscuous mode

#1 lore raw
Quoted 40 lines · Alberto Bertogli

This is the 3rd day in a row i got an oops.
The only difference this time was the machine had one postgresql running, with mailsnarf, vmstat, apache and inetd; without any load.

The oops (passed through ksymoops 2.4) is attached, with the dmesg.

Linux sol 2.4.1 #3 SMP Wed Feb 14 18:14:33 ARST 2001 i686 unknown The only module loaded is the megaraid.

Please ask if you need any other info.

Thanks,
Alberto

------------------------------------------------------------------------

ksymoops 2.3.7 on i686 2.4.1. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.1/ (default)
-m /boot/System.map (specified)

Unable to handle kernel paging request at virtual address 00009fac
*pde = 00000000
CPU:    1
EIP:    0010:[<c01071ec>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: c01071c0 ecx: c1228000 edx: c1228000
esi: c1228000 edi: c01071c0 ebp: 00000000 esp: c1229bf0
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c1229000)

Stack: c010724e 00000000 00000000 00000000 c037d886 0000002b 00000000 c024126d
       00000000 00000006 00000007 00000000 00000000 c03e8a40 0000c000 c01e771e
       c1223000 00000001 00000000 00000000
Call trace: [<c010724e>] [<c024126d>] [<c01e771e>]
Code: c3 8d 76 00 fb c3 89 f6 fb ba 00 e0 ff ff 21 e2 b8 ff ff ff
Quoted 8 lines
Quoted 1 line
Quoted 1 line

EIP; c01071ec <default_idle+2c/34> <=====

Trace; c010724e <cpu_idle+3a/50>
Trace; c024126d <vgacon_cursor+1e9/1f4>
Trace; c01e771e <set_cursor+6e/84>
Code; c01071ec <default_idle+2c/34>
00000000 <_EIP>:
Code; c01071ec <default_idle+2c/34> <=====
0: c3 ret <=====

This one just looks really odd. I can't figure out where the faulting address (0x00009fac) is coming from. It's not from the ret instruction, which should be getting a valid return address off the stack. Do you still have the raw oops message (before sending it through ksymoops)?

--

Brian Gerst

#2 lore raw
In reply to Alberto Bertogli

Quoting Brian Gerst <[email protected]>:

Quoted 7 lines

This one just looks really odd. I can't figure out where the faulting address (0x00009fac) is coming from. It's not from the ret instruction,
which should be getting a valid return address off the stack. Do you still have the raw oops message (before sending it through ksymoops)?

Yes, this is the original oops, copied by hand.
The virtual address is very different from the other two.. I'll see tomorrow if there is a 4th oops.

Unable to handle kernel paging request at virtual address 00009fac
*pde = 00000000
CPU:    1
EIP:    0010:[<c01071ec>]
EFLAGS: 00010246
eax: 00000000  ebx: c01071c0  ecx: c1228000  edx: c1228000
esi: c1228000  edi: c01071c0  ebp: 00000000  esp: c1229bf0
ds: 0018  es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c1229000)
Stack: c010724e 00000000 00000000 00000000 c037d886 0000002b 00000000 c024126d
       00000000 00000006 00000007 00000000 00000000 c03e8a40 0000c000 c01e771e
       c1223000 00000001 00000000 00000000
Call trace: [<c010724e>] [<c024126d>] [<c01e771e>]

Code: c3 8d 76 00 fb c3 89 f6 fb ba 00 e0 ff ff 21 e2 b8 ff ff ff
Kernel panic: Attemped to kill the idle task!

In idle task - not syncing

This last line doesn't appear on the ksymoops report, i really dont know why it insists on cutting it.

Thanks a lot,
Alberto

#3 lore raw
Quoted 5 lines · Alberto Bertogli
Kernel panic: Attemped to kill the idle task!

In idle task - not syncing

This last line doesn't appear on the ksymoops report, i really dont know why it insists on cutting it.

Because it has nothing to do with the oops, it is a symptom, not a cause.