IRQ advice (2.4.2-ac7)
Hello,
as I boot some times under windows, i have to change my IRQ for my PCI devices to (all) 9... and all the times I tried to boot that way under linux, it doesn't boot...
So I haven't tested it that way for ages... and now with 2.4.2-ac7 i booted without any problem that way:
cat /proc/interrupts 03.03 1:52
CPU0
0: 3051534 XT-PIC timer 1: 37390 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 6193814 XT-PIC HiSax, aic7xxx, EMU10K1, usb-uhci, saa7146(1), bttv 12: 314048 XT-PIC PS/2 Mouse 14: 11820 XT-PIC ide0 15: 42041 XT-PIC ide1 NMI: 27599 LOC: 3051630 ERR: 0 MIS: 0
Is it safe to do it that way?
Thanks you very much,
Greg
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
Quoted 23 lines · Favre Gregoire
Hello,
as I boot some times under windows, i have to change my IRQ for my PCI devices to (all) 9... and all the times I tried to boot that way under linux, it doesn't boot...
So I haven't tested it that way for ages... and now with 2.4.2-ac7 i booted without any problem that way:
cat/proc/interrupts03.03 1:52
CPU00: 3051534 XT-PIC timer 1: 37390 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 9: 6193814 XT-PIC HiSax, aic7xxx, EMU10K1, usb-uhci, saa7146(1), bttv 12: 314048 XT-PIC PS/2 Mouse 14: 11820 XT-PIC ide0 15: 42041 XT-PIC ide1 NMI: 27599 LOC: 3051630 ERR: 0 MIS: 0
Quoted 1 line
Is it safe to do it that way?
I personally don't like sharing interrupts unles absolutely necessary. Can you tell me why you need to do this? I would recommend disabling any devices you aren't using in the BIOS,
to free up interrupts. (IE 2nd serial port, USB, 1st serial if you only use PS/2 mouse)
If you don't use the floppy you might be able to disable it in BIOS. I have one board that will use irq 6 for something more useful in this case.
Also, changing PCI slot assignment of some cards (if you have spare slots) can prevent sharing as well.
The BIOS on many boards will show PCI interrupt assignment on the bootup screen. Otherwise check in windows device manager - double click on Computer node.
according to the above usage, you could use 4 (com1) (if not mouse or modem) 3 com2
5 unused
9,10,11
for devices.
Good luck!