2.4.2-ac16 PIIX4 ACPI getting wrong IRQ?
With 2.4.3-pre1, /proc/pci contained:
Quoted 2 lines
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 1).
With 2.4.2-ac16, /proc/pci contains:
Quoted 3 lines
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 1).IRQ 9.
So the ACPI function of the PIIX4 is now being given IRQ 9. I don't want this. I was using IRQ 9 for a PCMCIA device.
So I tried booting the kernel with "acpi=off" and "pci=irqmask=0x0800", but the result was the same.
Documentation/kernel-parameters.txt says that "pci=irqmask=0xMMMM ... sets a bit mask of IRQs allowed to be assigned". This parameter is being ignored.
[... searches through kernel sources ...]
Well I see that this is the result of a change to /usr/src/linux-2.4.2-ac16/arch/i386/kernel/pci_pc.c which looks deliberate:
< static void __init pci_fixup_piix4_acpi(struct pci_dev *d) < {
< /*
< * PIIX4 ACPI device: hardwired IRQ9
< */
< d->irq = 9;
< }
What's going on?
Thomas Hood
jdthood_AT_yahoo.co.uk
Quoted 8 lines
With 2.4.2-ac16,
/proc/pcicontains:Quoted 3 lines
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 1).IRQ 9.So the ACPI function of the PIIX4 is now being given IRQ 9. I don't want this. I was using IRQ 9 for a PCMCIA device.
It was always being given IRQ 9, now we correctly handle this.