DPT Driver Status
I have searched the archives, hunted through the adaptec site, tried multiple patches, compilers, revisions.....
I have a DPT/Adaptec DPT RAID V century card. This has been a topic of much discussion in the past on this list.
What I have found is that almost every file I find has a patch that is 6 months old at best.
I even contacted Deanna Bonds at Adaptec, but she has been unresponsive.
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?
Has the native i2o driver been updated to handle what the dpt card is doing?
thanks in advance
Dalton
Quoted 2 lines · Dalton Calford
I have searched the archives, hunted through the adaptec site, tried multiple patches, compilers, revisions.....
Me too...
Quoted 6 lines
I have a DPT/Adaptec DPT RAID V century card. This has been a topic of much discussion in the past on this list.
What I have found is that almost every file I find has a patch that is 6 months old at best.
When I last contacted them, couple of months ago, through I-dunno-how-many-middle[wo]men they assured that "driver is in developement" and "soon we make a release"...
Quoted 4 lines
I even contacted Deanna Bonds at Adaptec, but she has been unresponsive.
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?
I have ported the 1.14 version of the driver to 2.2.18. Basically converted their idea of patching with cp to normal diff and dropped all reverse changes.
http://www.l-t.ee/marko/linux/dpt114-2.2.18p22.diff.gz
It was for pre22 but applies cleanly to final 2.2.18. The other soft was most current in valinux site:
http://ftp.valinux.com/pub/mirrors/dpt/
Quoted 2 lines
Has the native i2o driver been updated to handle what the dpt card is doing?
No, the DPT driver has not been updated to native Linux i2o.
Note: the driver compiles only with gcc 2.7.2.3, (dunno about egcs). 2.95.2 makes it acting weird. I do not know if thats gcc or driver problem.
Signature · 1 line
marko
Adaptec/DPT RAID Drivers [Was: Re: DPT Driver Status]
Marko/Dalton/Unfortunate person searching for working DPT drivers,
I too once felt your pain.
Searched far and wide, etc.
But then I stumbled upon ftp://ftp.suse.com/pub/people/mantel/next/
Which has patches for everything you could ever want, all integrated, if you choose them to be. Anyway, inside those .tgz's was version 2.0 of the DPT I2O drivers.
I've separated them from the .tgz, and stuck them up here:
Kernel 2.2.18:
http://aurore.net/source/dpt_i2o-2.0-2.2.18.gz
Kernel 2.4.2
http://aurore.net/source/dpt_i2o-2.0-2.4.2.gz
Try 'em! :-) Not sure how they compare to Markos' version.
I exchanged my ASR2100S for a Mylex AcceleRAID 170 - because DAC960 support is so much better ;-) and I loved reading through the DAC960 sources - so clean and easy to understand!
Regards,
Omar Kilani
Quoted 50 lines · Marko Kreen
Quoted 2 lines · Dalton Calford
I have searched the archives, hunted through the adaptec site, tried multiple patches, compilers, revisions.....
Me too...
Quoted 6 lines
I have a DPT/Adaptec DPT RAID V century card. This has been a topic of much discussion in the past on this list.
What I have found is that almost every file I find has a patch that is 6 months old at best.
When I last contacted them, couple of months ago, through I-dunno-how-many-middle[wo]men they assured that "driver is in developement" and "soon we make a release"...
Quoted 4 lines
I even contacted Deanna Bonds at Adaptec, but she has been unresponsive.
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?I have ported the 1.14 version of the driver to 2.2.18. Basically converted their idea of patching with cp to normal diff and dropped all reverse changes.
http://www.l-t.ee/marko/linux/dpt114-2.2.18p22.diff.gz
It was for pre22 but applies cleanly to final 2.2.18. The other soft was most current in valinux site:
http://ftp.valinux.com/pub/mirrors/dpt/
Quoted 2 lines
Has the native i2o driver been updated to handle what the dpt card is doing?
No, the DPT driver has not been updated to native Linux i2o.
Note: the driver compiles only with gcc 2.7.2.3, (dunno about egcs). 2.95.2 makes it acting weird. I do not know if thats gcc or driver problem.
--
marko-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: Adaptec/DPT RAID Drivers [Was: Re: DPT Driver Status]
I've got a SmartCACHE IV...This driver seems not to recognize it.
I applied it to 2.4.2...the patch didn't apply cleanly, however. I was able to manually patch the makefile to build the drivers for the card however, but it still didn't want to work.
In any case, if you have any insight on this I'd much appreciate it, as I'd like to get the card into production ASAP.
Thanks!
-Kelsey
Quoted 82 lines · Omar Kilani
Marko/Dalton/Unfortunate person searching for working DPT drivers,
I too once felt your pain.
Searched far and wide, etc.
But then I stumbled upon ftp://ftp.suse.com/pub/people/mantel/next/ Which has patches for everything you could ever want, all integrated, if you choose them to be.
Anyway, inside those .tgz's was version 2.0 of the DPT I2O drivers. I've separated them from the .tgz, and stuck them up here:Kernel 2.2.18:
http://aurore.net/source/dpt_i2o-2.0-2.2.18.gzKernel 2.4.2
http://aurore.net/source/dpt_i2o-2.0-2.4.2.gzTry 'em! :-) Not sure how they compare to Markos' version.
I exchanged my ASR2100S for a Mylex AcceleRAID 170 - because DAC960 support is so much better ;-) and I loved reading through the DAC960 sources - so clean and easy to understand!Regards,
Omar KilaniQuoted 42 lines · Marko Kreen
Quoted 2 lines · Dalton Calford
I have searched the archives, hunted through the adaptec site, tried multiple patches, compilers, revisions.....
Me too...
Quoted 6 lines
I have a DPT/Adaptec DPT RAID V century card. This has been a topic of much discussion in the past on this list.
What I have found is that almost every file I find has a patch that is 6 months old at best.
When I last contacted them, couple of months ago, through I-dunno-how-many-middle[wo]men they assured that "driver is in developement" and "soon we make a release"...
Quoted 4 lines
I even contacted Deanna Bonds at Adaptec, but she has been unresponsive.
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?I have ported the 1.14 version of the driver to 2.2.18. Basically converted their idea of patching with cp to normal diff and dropped all reverse changes.
http://www.l-t.ee/marko/linux/dpt114-2.2.18p22.diff.gz
It was for pre22 but applies cleanly to final 2.2.18. The other soft was most current in valinux site:
http://ftp.valinux.com/pub/mirrors/dpt/
Quoted 2 lines
Has the native i2o driver been updated to handle what the dpt card is doing?
No, the DPT driver has not been updated to native Linux i2o.
Note: the driver compiles only with gcc 2.7.2.3, (dunno about egcs). 2.95.2 makes it acting weird. I do not know if thats gcc or driver problem.
Quoted 8 lines
--
marko-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 4 lines
Kelsey Hudson [email protected] Software Engineer Compendium Technologies, Inc (619) 725-0771 ---------------------------------------------------------------------------
Re: Adaptec/DPT RAID Drivers [Was: Re: DPT Driver Status]
In reply to Omar KilaniQuoted 1 line · Dr. Kelsey Hudson
I've got a SmartCACHE IV...This driver seems not to recognize it.
It is not supposed to. For DPT .* I - IV use CONFIG_SCSI_EATA 'EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)' option.
Signature · 1 line
marko
Re: Adaptec/DPT RAID Drivers [Was: Re: DPT Driver Status]
In reply to Omar KilaniQuoted 2 lines · Omar Kilani
Kernel 2.4.2
http://aurore.net/source/dpt_i2o-2.0-2.4.2.gz
i also have a patched linux-2.4.2-ac20 tree for my own use at ftp://acid.ch.pw.edu.pl/pub/sq5bpf/linux-2.4.2-ac20+dpt.tar.gz that supports dpt smartraid V (i found a patch for 2.4.0-pre6 and hand patched it in). it seems to work with my ISP2150 (didn't crash yet :), after compiling with egcs 1.1.2 (some people warned about using anything else than gcc 2.7.2.3).
the only caveat is that if you set the ramsize 49152, root flags to 0 etc so it loads a floppy after a prompt, the dpt controller (and eepro100 that was also compiled in) gets initialised _after_ the root floppy is loaded. i'm not sure if this is a bug with the dpt patch or with the original kernel (will check tomorrow).
jacek
Quoted 5 lines
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?Has the native i2o driver been updated to handle what the dpt card is doing?
I tried, I never managed to get the board and our i2o driver to be happy. As far as I could tell the board was the problem end but its never easy to be 100% sure about such things
Alan
I've got a DPT SmartCACHE IV with the raid adaptor... I'd like to get it working eventually. If you point me in the right direction I'll see if I can get that pesky driver to work, and even port over some code if need be....all someone has to do is point me towards documnentation and I'll make it work.
thanks,
kelsey
Quoted 18 lines · Alan Cox
Quoted 5 lines
Does anyone have a working patch for the 2.2.18 kernel?
What is the most stable version of the kernel for the use of the patch?Has the native i2o driver been updated to handle what the dpt card is doing?
I tried, I never managed to get the board and our i2o driver to be happy. As far as I could tell the board was the problem end but its never easy to be 100% sure about such things
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 4 lines
Kelsey Hudson [email protected] Software Engineer Compendium Technologies, Inc (619) 725-0771 ---------------------------------------------------------------------------