Skip to contentSkip to conversation

Matrox framebuffer dualhead and utilities

DISCUSSION German Gomez Garcia 2 participants 2 messages Mar 20, 2001 – Mar 21, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I'm trying to set the Matrox framebuffer to dualhead or TV output,
but the utilities mentioned in the docs seem to be outdated (ioctl failed with incorrect command). Any idea about where to get up to date tools? I'm using kernel 2.4.2-ac20 (quite stable 5 days uptime with heavy DRI testing and heavy disk working).

Thanks

- german

PS: Please CC to me as I'm not subscribed to the list.
-------------------------------------------------------------------------
German Gomez Garcia | "This isn't right. This isn't even wrong."
<[email protected]> | -- Wolfgang Pauli

#1 lore raw
Quoted 5 lines · German Gomez Garcia

I'm trying to set the Matrox framebuffer to dualhead or TV output,
but the utilities mentioned in the docs seem to be outdated (ioctl failed with incorrect command). Any idea about where to get up to date tools? I'm using kernel 2.4.2-ac20 (quite stable 5 days uptime with heavy DRI testing and heavy disk working).

matroxset-0.3 is latest one. You are probably doing something wrong:
(1) With fbset you are trying to use 8bpp or 24bpp color depth. Secondary
head supports only 16/32bpp.
(2) You did not insmod all needed modules if you compiled matroxfb as modular (you should compile everything into the kernel...)
(3) You are trying to do some illegal thing, like connecting both /dev/fb0 and /dev/fb1 into same output...
Petr Vandrovec [email protected]