kernel apm code
The current kernel ( 2.4.2-ac26 or 2.4.3-pre8 ) has arch/i386/kernel/apm.c version 1.14 while version 1.15 is available as a patch to 2.3.99-pre7-1 ( read :
it was available for ages ) at http://linuxcare.com.au/apm/
The newer version has among other things support for the APM_IOC_REJECT ioctl which is useful for example when implementing "run /sbin/shutdown -h when the power button is pressed".
While isn't this merged into the official kernel ?
Is apm.c v1.15 the latest ?
The last modification of the http://linuxcare.com.au/apm/ page was in may 2000 and in 2.4.2-ac25 the web address for the APM driver was changed to http://www.canb.auug.org.au/~sfr/ , but that page doesn't have much/any content about the APM driver.
On a related note :
Both Abit BH6 and MSI K7T Pro2A send a SYSTEM_SUSPEND APM event ( APM_SYS_SUSPEND ) when I press the power button. When the OS acknowledges the event, the system doesn't go to suspend , as the OS expects , but to power-off , killing all running processes and causing an unclean umount , among other things.
Is this the APM standard behavior or do I have two weird motherboards ?
P.S.: Looking for an archive of the [email protected] mail list.
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -
Quoted 6 lines · David Balazic
The newer version has among other things support for the
APM_IOC_REJECTioctl which is useful for example when implementing "run/sbin/shutdown-h when the power button is pressed".While isn't this merged into the official kernel ?
The maintainer hasn't the time to do it. He promised me he would in February, when I telephone, but hasn't bothered to do anything AFAICS. I hacked together the following patch for it a while ago, which updated APM_IOC_REJECT for slightly more recent kernels (be warned, I think I made some mistakes)
arch/i386/kernel/apm.c +75 -4
@@ -38,6 +38,7 @@* Jan 2000, Version 1.12 * Feb 2000, Version 1.13 * Nov 2000, Version 1.14 +* Dec 2000, Version 1.15 * * History: * 0.6b: first version in official kernel, Linux 1.3.46
@@ -148,6 +149,10 @@* 1.14: Make connection version persist across module unload/load. * Enable and engage power management earlier. * Disengage power management on module unload. +* 1.15: Add APM_IOC_REJECT ioctl, based on a patch from Stephen +* Rothwell but apparently written by Craig Markwardt +* <[email protected]>. +* John Fremlin <[email protected]> * * APM 1.1 Reference: *
@@ -301,6 +306,7 @@int suspend_result;int suspends_pending;int standbys_pending; +int rejects_pending;int suspends_read;int standbys_read;int event_head;
@@ -325,6 +331,7 @@#endif static int suspends_pending;static int standbys_pending; +static int rejects_pending;static int waiting_for_resume;static int ignore_normal_resume;static int bounce_interval =DEFAULT_BOUNCE_INTERVAL ;
@@ -350,7 +357,7 @@static DECLARE_WAIT_QUEUE_HEAD (apm_suspend_waitqueue);static struct apm_user * user_list; -static char driver_version[] ="1.14" ;/* no spaces */ +static char driver_version[] ="1.15" ;/* no spaces */ static char * apm_event_name[] = {"system standby" ,
@@ -832,6 +839,15 @@ as->standbys_pending++; standbys_pending++;break ; + +case APM_SUSPEND_REJECT : + as->suspend_wait =0 ; + as->suspend_result = -EAGAIN ; +/* Fall through to */ +case APM_STANDBY_REJECT : + as->rejects_pending++; + rejects_pending++; +break ; } }wake_up_interruptible (&apm_waitqueue);
@@ -1211,6 +1227,41 @@return 0 ; } +static int send_reject (struct apm_user *as,apm_event_t state) +{ +if (as->rejects_pending >0 ) { + as->rejects_pending--; + rejects_pending--; + }else { +switch (state) { +case APM_SYS_SUSPEND : +case APM_USER_SUSPEND : +queue_event (APM_SUSPEND_REJECT , as); +break ; +case APM_SYS_STANDBY : +case APM_USER_STANDBY : +queue_event (APM_STANDBY_REJECT , as); +break ; + } + } +if ((rejects_pending <=0 ) && + (suspends_pending <=0 ) && + (standbys_pending <=0 )) { +switch (state) { +case APM_SYS_SUSPEND : +case APM_USER_SUSPEND : +send_event (APM_NORMAL_RESUME ); +break ; +case APM_SYS_STANDBY : +case APM_USER_STANDBY : +send_event (APM_STANDBY_RESUME ); +break ; + } +return apm_set_power_state (APM_STATE_REJECT ); + } +return APM_SUCCESS ; +} +static int do_ioctl (struct inode * inode,struct file *filp,u_int cmd,u_long arg) {
@@ -1262,12 +1313,30 @@return as->suspend_result; }break ; +case APM_IOC_REJECT : +if (as->suspends_read >0 ) { + as->suspends_read--; + as->suspends_pending--; + suspends_pending--; +if (send_reject (as,APM_SYS_SUSPEND )!=APM_SUCCESS ) +return -EREMOTEIO ; + }else if (as->standbys_read >0 ) { + as->standbys_read--; + as->standbys_pending--; + standbys_pending--; +if (send_reject (as,APM_SYS_STANDBY )!=APM_SUCCESS ) +return -EREMOTEIO ; + }else +return -EINVAL ; +break ;default :return -EINVAL ; }return 0 ; } + +static int do_release (struct inode * inode,struct file * filp) {struct apm_user * as;
@@ -1277,14 +1346,16 @@return 0 ; filp->private_data =NULL ;lock_kernel (); + rejects_pending -= as->rejects_pending; + as->rejects_pending =0 ;if (as->standbys_pending >0 ) { standbys_pending -= as->standbys_pending; -if (standbys_pending <=0 ) +if (standbys_pending <=0 && rejects_pending <=0 )standby (); }if (as->suspends_pending >0 ) { suspends_pending -= as->suspends_pending; -if (suspends_pending <=0 ) +if (suspends_pending <=0 && rejects_pending <=0 ) (void )suspend (); }if (user_list == as)
@@ -1318,7 +1389,7 @@ } as->magic =APM_BIOS_MAGIC ; as->event_tail = as->event_head =0 ; - as->suspends_pending = as->standbys_pending =0 ; + as->suspends_pending = as->standbys_pending = as->rejects_pending =0 ; as->suspends_read = as->standbys_read =0 ;/* * XXX - this is a tiny bit broken, when we consider BSD
include/linux/apm_bios.h +3 -0
@@ -139,6 +139,8 @@#define APM_USER_SUSPEND 0x000a#define APM_STANDBY_RESUME 0x000b#define APM_CAPABILITY_CHANGE 0x000c +#define APM_STANDBY_REJECT 0x000d +#define APM_SUSPEND_REJECT 0x000e/* * Error codes
@@ -210,5 +212,6 @@#define APM_IOC_STANDBY _IO('A', 1)#define APM_IOC_SUSPEND _IO('A', 2) +#define APM_IOC_REJECT _IO('A', 3)#endif /* LINUX_APM_H */
I made a (IMHO) better version called pmpolicy, based on different principles. More information is available at
http://john.snoop.dk/programs/linux/offbutton/
The most recent version of the patch (for 2.4.2) is not yet uploaded however - mail me if you want it. It has not been included in the kernel, because the APM maintainer Stephen Rothwell didn't like the idea of me implementing it, as some people at linuxcare (including Stephen) want to do it differently themselves. However this "political" reason aside, Alan Cox says it changes too much for a stable release so I guess it's not going in.
[...]
Signature · 1 line
http://www.penguinpowered.com/~vii
Quoted 15 lines · John Fremlin
Quoted 3 lines · David Balazic
Quoted 2 lines · John Fremlin
David Balazic <[email protected]> writes:
[...]
Quoted 6 lines
Quoted 5 lines
The maintainer hasn't the time to do it. He promised me he would in February, when I telephone, but hasn't bothered to do anything AFAICS. I hacked together the following patch for it a while ago, which updated
APM_IOC_REJECTfor slightly more recent kernels (be warned, I think I made some mistakes)
Quoted 6 lines
Quoted 3 lines
It uses the same version number ( 1.15 ) as the "official"
apm.c( at linuxcare.com.au/apm ). I don't think that is a good idea. Maybe 1.14b ?Well it's not going to go anywhere unless you want to look after it so there's not much point in worrying about that :-)
And the 2.4.2-ac26 apm.c has version 1.14 changes listed that are different from the 1.14. changes listed in the patch from linuxcare.com.au/apm, so it is not as big problem as I thought.
Quoted 5 lines
[...]
Quoted 3 lines
Quoted 3 lines
I made a (IMHO) better version called pmpolicy, based on different principles. More information is available at
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
To implement off-button you only need the
APM_IOC_REJECTioctl andThe problem on my computer with my (re)implementation of
APM_IOC_REJECTis that the screen goes into powersaving when the user suspend is received, then turns it back on whenAPM_IOC_REJECTis sent by apmd.
What is wrong with that ?
Suspend is requested -> suspend is executed Suspend is canceled (rejected) -> suspend is canceled
Seems perfectly OK to me.
Quoted 2 lines
Stephen said this was something wrong with my implementation (???).
User error ? :-)
Quoted 3 lines
Anyway it is fixed in my pmpolicy patch, and I don't need no daemon so the code is a lot cleaner and simpler (no binary magic number interfaces).
But there should be no policy in the kernel ! ;-)
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -
Quoted 1 line · David Balazic
John Fremlin wrote:
[...]
Quoted 7 lines
Quoted 6 lines
Quoted 1 line
To implement off-button you only need the
APM_IOC_REJECTioctl andThe problem on my computer with my (re)implementation of
APM_IOC_REJECTis that the screen goes into powersaving when the user suspend is received, then turns it back on whenAPM_IOC_REJECTis sent by apmd.
Quoted 7 lines
What is wrong with that ?
Suspend is requested -> suspend is executed
Suspend is canceled (rejected) -> suspend is canceled
Seems perfectly OK to me.
The sequence is in fact: suspend requested by BIOS -> suspend accepted by kernel -> SUSPEND -> suspend rejected by apmd which is passed on by kernel to BIOS -> REJECT=RESUME (if I understand correctly, this is what seems to happen).
Sequence should be as in pmpolicy patch: suspend requested by BIOS -> /sbin/powermanger decides to reject -> REJECT
[...]
Quoted 5 lines
Quoted 3 lines
Anyway it is fixed in my pmpolicy patch, and I don't need no daemon so the code is a lot cleaner and simpler (no binary magic number interfaces).
But there should be no policy in the kernel ! ;-)
Read the patch. Read the webpage:
http://john.snoop.dk/programs/linux/offbutton
There is no policy in kernel.
Signature · 1 line
http://www.penguinpowered.com/~vii
Quoted 22 lines · John Fremlin
Quoted 1 line · David Balazic
John Fremlin wrote:
[...]
Quoted 7 lines
Quoted 6 lines
Quoted 1 line
To implement off-button you only need the
APM_IOC_REJECTioctl andThe problem on my computer with my (re)implementation of
APM_IOC_REJECTis that the screen goes into powersaving when the user suspend is received, then turns it back on whenAPM_IOC_REJECTis sent by apmd.Quoted 7 lines
What is wrong with that ?
Suspend is requested -> suspend is executed
Suspend is canceled (rejected) -> suspend is canceled
Seems perfectly OK to me.
Quoted 7 lines
The sequence is in fact: suspend requested by BIOS -> suspend accepted by kernel -> SUSPEND -> suspend rejected by apmd which is passed on by kernel to BIOS -> REJECT=RESUME (if I understand correctly, this is what seems to happen).
Sequence should be as in pmpolicy patch: suspend requested by BIOS ->
/sbin/powermangerdecides to reject -> REJECT
AFAICT , the kernel does not accept(*) any APM_EVENT until all userspace "listeners" say it is OK. So until apmd doesn't reply, the kernel does not accept the SUSPEND. If apmd says OK, kernel says OK to BIOS and SUSPEND is activated, but if apmd says NO-NO, then the kernel rejects the SUSPEND request and "nothing happens"
This is of course with a proper implementation of REJECT functionality in the kernel apm driver. I don't know if it behaves like this in the current IOC_AOM_REJECT version, but it should :-)
* - by accept I mean : it receives a notification from BIOS and replies OK to the BIOS. the BIOS doesn't change the powerstate until the kernel responds with OK , IIRC
Quoted 18 lines
[...]
Quoted 5 lines
Quoted 3 lines
Anyway it is fixed in my pmpolicy patch, and I don't need no daemon so the code is a lot cleaner and simpler (no binary magic number interfaces).
But there should be no policy in the kernel ! ;-)
Read the patch. Read the webpage:
http://john.snoop.dk/programs/linux/offbutton
There is no policy in kernel.
--
Signature · 4 lines
David Balazic -------------- "Be excellent to each other." - Bill & Ted - - - - - - - - - - - - - - - - - - - - - -