Skip to contentSkip to conversation

AHA-154X/1535 not recognized any more [Repost]

DISCUSSION Markus Schaber 1 participant 2 messages Apr 24, 2001 – Apr 26, 2001

lore
Share & tools
lore

Markus Schaber

author
#0 lore raw

As my original message seems to have disappeared, here a Repost:

-------- Original Message --------
Subject: Re: AHA-154X/1535 not recognized any more
Date: Fri, 20 Apr 2001 14:28:14 +0200 (MEST)
From: Markus Schaber <[email protected]>
To: "Rafael E. Herrera" <[email protected]>
CC: Markus Schaber <[email protected]>,Alan Cox <[email protected]>,Linux Kernel Mailing List <[email protected]>

Quoted 10 lines · Rafael E. Herrera
Quoted 4 lines
lunix:~# isapnp pnpconfig.txt
Board 1 has Identity 08 0f 6d b9 45 42 15 90 04:  ADP1542 Serial No 258849093 [checksum 08]
pnptext:60 -- Fatal - IO range check attempted while device activated
pnptext:60 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted

I've a pnp sound card that fails to configure with a similar error message when a (CHECK) entry was found in an (IO ...) block. Removing those entries solved the problem. Try this in your pnpconfig.txt:

(IO 0 (SIZE 4) (BASE 0x0330))

In this case, isapnp configures the card.

Using a modularized kernel, modprobe also loads the driver without any further parameters:

lunix:/home/schabi/public_html/scsi# /rescue/sbin/isapnp
pnpconfig_nocheck.txt
Board 1 has Identity 08 0f 6d b9 45 42 15 90 04:  ADP1542 Serial No
258849093 [checksum 08]
ADP1542/258849093[0]{SCSI Host Adapter   }: Port 0x330; IRQ10 DMA0 ---
Enabled OK
lunix:/home/schabi/public_html/scsi# modprobe aha1542
lunix:/home/schabi/public_html/scsi#
ls /proc/scsi
advansys  aha1542  ide-scsi  scsi  sg
lunix:/home/schabi/public_html/scsi# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 03 Lun: 00
  Vendor: YAMAHA   Model: CRW8424S         Rev: 1.0j
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: IOMEGA   Model: ZIP 100          Rev: 03.H
  Type:   Direct-Access                    ANSI SCSI revision: ffffffff
Host: scsi1 Channel: 00 Id: 01 Lun: 00
  Vendor: SAMSUNG  Model: CD-ROM SCR-3231  Rev: S104
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 06 Lun: 00
  Vendor: IOMEGA   Model: ZIP 100 PLUS     Rev: J.66
  Type:   Direct-Access                    ANSI SCSI revision: 02

So the isapnp tools can configure the card correctly.

markus

author
#1 lore raw

The further way? (was: Re: AHA-154X/1535 not recognized any more)

Hello,

Markus Schaber wrote:
[some Test results]

So what's the further way to go?

We found out that the kernel isapnp fails, while the isapnptools (with "check" entry removed and the driver as a module) and a non-pnp environment (where the BIOS initialzies it, and either a modularized and a compiled in driver) work with this card.

Do I (as a non-kernel-hacker, and with only basic C experience) have any chance to quickly read into the code and find and correct the bug? Or is there anyone around here who just needs five minutes to adjust a few lines?

As I said, I don't need the card any more, and am just waiting for this thing to be resolved, and then I remove this ancient thing. I could even send it to one of you per snail mail for some weeks to let you do further tests. My intention was to give a possibility to get the bug fixed :-)

markus

Signature · 4 lines
Markus Schaber -- http://www.schabi.de/ -- ICQ: 22042130
+-------------------------------------------------------------+
| Allgemeine Sig-Verletzung 0815/4711  <nicht OK> <Erbrechen> |
+-------------------------------------------------------------+