Skip to contentSkip to conversation

Problem with module loading on a 2.4 kernel

DISCUSSION Brian Murphy 2 participants 2 messages May 15, 2001 MIPS

lore
Share & tools
lore
#0 lore raw

When we try to load a module into a 2.4.3 kernel we get the following error:

# insmod /lib/modules/ipchains.o
insmod: kernel: QM_SYMBOLS: Unknown error 716862128

does anyone know what the matter here.

The toolchain we use is based on the patched egcs-1.1.2 and binutils-2.8.1
at oss.

/Brian

#1 lore raw
Quoted 4 lines · Brian Murphy

When we try to load a module into a 2.4.3 kernel we get the following error:

Quoted 9 lines
# insmod /lib/modules/ipchains.o
insmod: kernel: QM_SYMBOLS: Unknown error 716862128

does anyone know what the matter here.

The toolchain we use is based on the patched egcs-1.1.2 and binutils-2.8.1
at oss.

And thus your problem. You need a newer toolchain. The binutils and gcc out of CVS. For binutils you can also use HJ Lu's with version 2.11.90.0.5 or better.

-Steve

Signature · 4 lines
 Steven J. Hill - Embedded SW Engineer
 Public Key: 'http://www.cotw.com/pubkey.txt'
 FPR1: E124 6E1C AF8E 7802 A815
 FPR2: 7D72 829C 3386 4C4A E17D