Skip to contentSkip to conversation

parport problems with devfs

DISCUSSION Nico Schottelius 3 participants 4 messages May 16, 2001 – May 22, 2001

lore
Share & tools
lore
#0 lore raw

Hello!

I attached the problem occured with parport and devfs. I don't exactly know where the problem in the parport source is. If someone has a patch for it, I will test it.

Nico

# Loading the parport and parport_pc modules for my parallelport flapp:/home/user/nico/gpm-1.19.3 # modprobe parport_pc

# is there an entry in /dev ?
flapp:/home/user/nico/gpm-1.19.3 # ls /dev/
.         cdroms   fb      initctl  mem   ptmx    root     usb
..        console  full    input    misc  pts     shm      vc
.devfsd   cpu      gpmctl  kmem     null  pty     tty      vcc
apm_bios  discs    ide     log      port  random  urandom  zero

# What does the kernel message say ? flapp:/home/user/nico/gpm-1.19.3 # dmesg | tail -n 14 usb.c: registered new driver hid
mice: PS/2 mouse device common for all mice
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 7
0x378: readIntrThreshold is 7
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x49
0x378: ECP settings irq=7 dma=1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)

# Have a look what lp0 has been before

Quoted 1 line

From /usr/src/linux/Documentation/ :

6 char Parallel printer devices
0 = /dev/lp0 Parallel printer on parport0
1 = /dev/lp1 Parallel printer on parport1

# make our own device out of /dev
flapp:/ # mknod /lp0 c 6 0
# has anything happened ? No! 
flapp:/ # ls /dev/
.         cdroms   fb      initctl  mem   ptmx    root     usb
..        console  full    input    misc  pts     shm      vc
.devfsd   cpu      gpmctl  kmem     null  pty     tty      vcc
apm_bios  discs    ide     log      port  random  urandom  zero

# Use the printer the easiest way :)
flapp:/ # cat /tmp/* > lp0

# And now...
flapp:/ # ls /dev/

.         cdroms   fb      initctl  mem   printers  random  urandom  zero
..        console  full    input    misc  ptmx      root    usb
.devfsd   cpu      gpmctl  kmem     null  pts       shm     vc
apm_bios  discs    ide     log      port  pty       tty     vcc
# there is now the entry printers/0.
#1 lore raw
Quoted 3 lines

I attached the problem occured with parport and devfs. I don't exactly know where the problem in the parport source is. If someone has a patch for it, I will test it.

I don't think this is a bug. You need to load the `lp' module.

p.

#2 lore raw
In reply to Nico Schottelius

Hmm..seems you are exactly right!

Sorry for that wrong though!

Nico

Quoted 7 lines · Philip Blundell
Quoted 3 lines

I attached the problem occured with parport and devfs. I don't exactly know where the problem in the parport source is. If someone has a patch for it, I will test it.

I don't think this is a bug. You need to load the `lp' module.

p.

#3 lore raw
In reply to Nico Schottelius
Quoted 8 lines · Nico Schottelius

I attached the problem occured with parport and devfs. I don't exactly know where the problem in the parport source is. If someone has a patch for it, I will test it.

[...]

# make our own device out of /dev
flapp:/ # mknod /lp0 c 6 0
                  ^

You are creating /lp0 and not /dev/lp0.

Anuradha

----------------------------------
http://www.bee.lk/people/anuradha/