Skip to contentSkip to conversation

noapic doesn't quite work as advertised

DISCUSSION Studierende der Universitaet des Saarlandes 1 participant 1 message May 23, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 5 lines

've got a tyan s2520 motherboard (dual PIII + i840) which is having a problem with APIC errors. I tried running with noapic, but there were still errors, although fewer. Does anyone have any idea what is going on? I'm running 2.4.4 and software raid5, which generates a lot of interrupts.

noapic only prevents that hardware interrupts are rerouted through the io apic.

The inter processor interrupts still use the apic bus, and it's impossible to use SMP without IPIs.

Quoted 3 lines

Right now I'm running with noapic and nosmp and so far this seems to be working. I really would like to be able to use the second cpu so any suggestion would be greatly appreciated.

It could be a hardware problem, or the board uses an unusal io apic that's not properly handled.
If you boot without noapic, are there any unusual message in the boot log?

Perhaps
MP-BIOS bug
unknown io apic
etc.