Skip to contentSkip to conversation

2.4.5: 'mount /cdrom' doesn't work

DISCUSSION Harald Dunkel 2 participants 5 messages May 26, 2001

lore
Share & tools
lore
#0 lore raw

Hi folks,

With 2.4.5 my CD and DVD drives have become unaccessable.

Can you reproduce this problem?

Regards

Harri

#1 lore raw
Quoted 5 lines · Harald Dunkel

Hi folks,

With 2.4.5 my CD and DVD drives have become unaccessable.

Can you reproduce this problem?

Any kernel messages? And please show what happens.

Signature · 1 line
Jens Axboe
#2 lore raw
In reply to Harald Dunkel
Quoted 29 lines · Harald Dunkel
Quoted 10 lines · Jens Axboe
Quoted 5 lines · Harald Dunkel

Hi folks,

With 2.4.5 my CD and DVD drives have become unaccessable.

Can you reproduce this problem?

Any kernel messages? And please show what happens.

Currently I am back to 2.4.4, but AFAIR I got a message 'no medium found' or something like that on the command line.

I have found this in kern.log:

May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr2 at scsi2, channel 0, id 0, lun 0
May 26 15:31:17 bilbo kernel: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: Uniform CD-ROM driver Revision: 3.12
May 26 15:31:17 bilbo kernel: sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: sr2: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: VFS: Disk change detected on device sr(11,1)
May 26 15:31:17 bilbo last message repeated 3 times
May 26 15:31:17 bilbo kernel: Device 0b:01 not ready.
May 26 15:31:17 bilbo kernel:  I/O error: dev 0b:01, sector 1024
Quoted 1 line

Using 2.4.4 the same CD works in the same drive.

The only changes that could matter would be SCSI driver changes. You wouldn't happen to use the new aic7xxx driver?

Signature · 1 line
Jens Axboe
#3 lore raw
In reply to Harald Dunkel
Quoted 5 lines · Jens Axboe

The only changes that could matter would be SCSI driver changes. You wouldn't happen to use the new aic7xxx driver?

I had the same problem with the IDE CD writer (using SCSI emulation).

Regards

Harri

#4 lore raw
In reply to Harald Dunkel
Quoted 10 lines · Jens Axboe
Quoted 5 lines · Harald Dunkel

Hi folks,

With 2.4.5 my CD and DVD drives have become unaccessable.

Can you reproduce this problem?

Any kernel messages? And please show what happens.

Currently I am back to 2.4.4, but AFAIR I got a message 'no medium found' or something like that on the command line.

I have found this in kern.log:

May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
May 26 15:31:17 bilbo kernel: Detected scsi CD-ROM sr2 at scsi2, channel 0, id 0, lun 0
May 26 15:31:17 bilbo kernel: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: Uniform CD-ROM driver Revision: 3.12
May 26 15:31:17 bilbo kernel: sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: sr2: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
May 26 15:31:17 bilbo kernel: VFS: Disk change detected on device sr(11,1)
May 26 15:31:17 bilbo last message repeated 3 times
May 26 15:31:17 bilbo kernel: Device 0b:01 not ready.
May 26 15:31:17 bilbo kernel:  I/O error: dev 0b:01, sector 1024

Using 2.4.4 the same CD works in the same drive.

Regards

Harri