eepro100 2.4.7-ac3 problems (apm related)
Quoted 5 lines
eepro100 2.4.7-ac3 problems (apm related)
Hi!
Quoted 9 lines
The eepro100 interface in my Fujitsy/Siemens Lifebook S-4546 won't come up after a suspend, if I unload the module and load it again it works fine...
"ioctl SIOCSIFFLAGS: No such device" is the error message.This happend in 2.4.5 i think.
/Pawel
same here with an eepro100 inside a IBM Thinkpad570. Happened with
2.4.6-ac2. Since then I apply the appended patch after installing "-ac" stuff. This completely disables power state handling for the device. Not very clean, but I do not care in this particular case. It probably shows a more principal issue with the eepro100. Kai - did you look deeper into the issue?
Martin
diff -rc2 eepro100.c eepro100.c-ac3-orig
*** eepro100.c Tue Jul 31 11:21:26 2001
--- eepro100.c-ac3-orig Tue Jul 31 11:20:56 2001
***************
*** 779,783 ****
/* Put chip into power state D2 until we open() it. */
! pci_set_power_state(pdev, 0); /* MKN */
pci_set_drvdata (pdev, dev);
--- 779,783 ----
/* Put chip into power state D2 until we open() it. */
! pci_set_power_state(pdev, 2);
pci_set_drvdata (pdev, dev);
***************
*** 1834,1838 ****
printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n",dev->name, i);
! pci_set_power_state(sp->pdev, 0); /* MKN */
MOD_DEC_USE_COUNT;
--- 1834,1838 ----
printk(KERN_DEBUG "%s: %d multicast blocks dropped.\n",dev->name, i);
! pci_set_power_state(sp->pdev, 2);
MOD_DEC_USE_COUNT;
Signature · 5 lines
------------------------------------------------------------------ Martin Knoblauch | email: [email protected] TeraPort GmbH | Phone: +49-89-510857-309 C+ITS | Fax: +49-89-510857-111 http://www.teraport.de | Mobile: +49-170-4904759