Skip to contentSkip to conversation

FYI (2.4.4) on a HP Netserver LD Pro

DISCUSSION Ulrich Windl 2 participants 2 messages Aug 9, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have some odd boot messages (new since switching from kernel 2.2 to 2.4) for the HP Netserver LD Pro (Pentium Pro 200MHz). I'd like to know if there is a hardware or configuration problem, or whether it's "just normal" (the "reserved twice").

Messages:
<4>Linux version 2.4.4-4GB ([email protected]) (gcc version 2.95.3 20010315 \
(SuSE)) #1 Wed May 16 00:37:55 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) <4> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f1cb4 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000004000000 (usable) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff1cb4 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000fd8d0
<4>hm, page 000fd000 reserved twice.
<4>hm, page 000fe000 reserved twice.
<4>hm, page 0009e000 reserved twice.
<4>hm, page 0009f000 reserved twice.
<4>On node 0 totalpages: 16384
<4>zone(0): 4096 pages.
<4>zone(1): 12288 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: HP Product ID: LH Pro APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17

<4>    Floating point unit present.
<4>    Machine Exception supported.
<4>    64 bit compare & exchange supported.
<4>    Internal APIC present.
<4>    SEP present.
<4>    MTRR  present.
<4>    PGE  present.
<4>    MCA  present.
<4>    CMOV  present.
<4>    Bootup CPU

<4>Bus #0 is PCI
<4>Bus #1 is PCI
<4>Bus #2 is EISA
<4>I/O APIC #1 Version 17 at 0xFEC00000.
<4>Int: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID 1, APIC INT 00
...
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 1, APIC INT 0f <4>Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 00 <4>Lint: type 1, pol 1, trig 1, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 <4>Processors: 1
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)

Regards,
Ulrich

#1 lore raw
Quoted 20 lines · Ulrich Windl

Hello,

I have some odd boot messages (new since switching from kernel 2.2 to 2.4) for the HP Netserver LD Pro (Pentium Pro 200MHz). I'd like to know if there is a hardware or configuration problem, or whether it's "just normal" (the "reserved twice").

Messages:
<4>Linux version 2.4.4-4GB ([email protected]) (gcc version 2.95.3 20010315 \
(SuSE)) #1 Wed May 16 00:37:55 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) <4> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f1cb4 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 0000000004000000 (usable) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff1cb4 - 0000000100000000 (reserved)

Quoted 8 lines

<4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000fd8d0
<4>hm, page 000fd000 reserved twice.
<4>hm, page 000fe000 reserved twice.
<4>hm, page 0009e000 reserved twice.
<4>hm, page 0009f000 reserved twice.

It's "just normal". The MP-table parsing code reserves space for the MP table and then parses the table. But the table also reserves its own space.

-