Skip to contentSkip to conversation

1.5 GB ram on system - only 900 MB shows

DISCUSSION Dan Kegel 1 participant 1 message Sep 3, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Dan Kegel

author
#1 lore raw
Quoted 10 lines · [email protected] (Nate Stone) wrote:
Quoted 6 lines
Quoted 4 lines

We were able to address 1024 MB of ram on our previous machine using the append feature during boot up, but it doesn't seem to work any more. Is this a problem related to the new memory management system in kernel 2.4.xx? Any solutions?

I think you must recompile your kernel with >1GB support. ...

Actually, we already built the kernel with 4GB support enabled and the ram was still not recognized. We get the same exact problem.

Quoted 8 lines

... try running
40+million pageviews per month off a crippled server because you can't access all the ram and the shared memory utilization sucks in kernel 2.4.xx. Talk about nightmares.

We probably will switch back to kernel 2.2.16 (which worked with 1GB of ram) and seemed way more efficient at memory management unless someone offers an alternative.

Going back to 2.2.x is probably a good idea for the moment, but it's a bit suprising that the RAM isn't showing up in 2.4. Is it possible you didn't boot with the kernel you thought you did?

I'm cc'ing this to linux-kernel, as this isn't really redhat specific, and the people there may have suggestions for you.
- Dan

Signature · 1 line
"I have seen the future, and it licks itself clean." -- Bucky Katt