Skip to contentSkip to conversation

hamachi (GNIC-II) and 2.4.9-ac9

DISCUSSION Lawrence MacIntyre 2 participants 2 messages Sep 7, 2001

lore
Share & tools
lore
#0 lore raw

Hi:

I have two machines with the Packet Engines Gigabit Ethernet NIC GNIC-II (hamachi) running RH7.1. One is an alpha, the other is a dual-cpu coppermine P-III on a SuperMicro P3DME motherboard. I was getting 325 Mb/s between them with the stock RH kernel, and I decided to upgrade to the 2.4.9 tree. It won't compile on the alpha, (keyboard stuff, fixed in -ac1), so I got the ac9 patches, and built the kernel. It's fine, except that the hamachi won't work. ifconfig shows no packets received, but some errors, there are no strange messages in /var/log/messages. I then built the same kernel on the intel box, and the same thing happened. No working hamachi.

Signature · 5 lines
                                 Lawrence
                                    ~
------------------------------------------------------------------------
 Lawrence MacIntyre    Center for Information Infrastructure Technology
 865.574.8696   [email protected]   http://www.ciit.y12.doe.gov/~lpz
#1 lore raw
Quoted 3 lines

except that the hamachi won't work. ifconfig shows no packets received, but some errors, there are no strange messages in /var/log/messages. I then built the same kernel on the intel box, and the same thing

Curious. There are no hamachi driver differences between 2.4.9 and 2.4.9-ac so the obvious question is which was the last version it did work ?