Skip to contentSkip to conversation

disregard: Re: ide zip 100 won't mount

DISCUSSION Sam Varshavchik 3 participants 3 messages Sep 17, 2001 – Sep 19, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines · Joseph Cheek

hmm, i went into windows *one more time* just to make sure it was still working, and not a hardware problem. well... looks like it doesn't work in windows either. must be hardware.

funny thing it shows up in dmesg and in "My Computer", just can't read from it.

That's pretty much what the sense codes below did indicate - media problem. Try a different disk.

Quoted 23 lines
Quoted 20 lines · Joseph Cheek

i've tried 2.4.7-ac10 and 2.4.9-ac10. same results. at boot i get:

Sep 17 11:02:48 seattle kernel: ide-floppy driver 0.97.sv
Sep 17 11:02:48 seattle kernel: hdd: No disk in drive
Sep 17 11:02:48 seattle kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512

sector size, 2941 rpm

looks good, right? but i put a disk in and i get:

Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc =  0, key =
2, asc = 30, ascq =  0
Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc = 1b, key =
2, asc = 30, ascq =  0
Sep 17 14:36:23 seattle kernel: hdd: No disk in drive 

not hardware, as it works in windows on the same machine.

any ideas?

thanks!

Signature · 1 line
Sam
#1 lore raw
Quoted 7 lines · Sam Varshavchik
Quoted 4 lines · Joseph Cheek

hmm, i went into windows *one more time* just to make sure it was still working, and not a hardware problem. well... looks like it doesn't work in windows either. must be hardware.

Quoted 6 lines
Quoted 2 lines

funny thing it shows up in dmesg and in "My Computer", just can't read from it.

That's pretty much what the sense codes below did indicate - media problem. Try a different disk.

I had the same problem. The second media works, the first got screwed up? I can't reproduce the problem now.

The media gets destroyed after partitioning and running mke2fs. I can't believe it myself - but have no other explanation.

When the media was broken I got:
<7>VFS: Disk change detected on device ide0(3,64)
<6> /dev/ide/host0/bus0/target1/lun0:<7>LDM: DEBUG (ldm.c, 877):
validate_partition_table: Found basic MS-DOS partition, not a dynamic
disk.
<4> p1 p2 p3 p4
<7>VFS: Disk change detected on device ide0(3,65)
<6> /dev/ide/host0/bus0/target1/lun0:<7>LDM: DEBUG (ldm.c, 877):
validate_partition_table: Found basic MS-DOS partition, not a dynamic
disk.
<4> p1 p2 p3 p4
[and so on with funny device numbers up to 3,93]

cat /proc/partitions

   3    64      98288 ide/host0/bus0/target1/lun0/disc
   3    65  272218546 ide/host0/bus0/target1/lun0/part1
   3    66  269488144 ide/host0/bus0/target1/lun0/part2
   3    67  699181456 ide/host0/bus0/target1/lun0/part3
   3    68      10668 ide/host0/bus0/target1/lun0/part4

Note: a new media has NO partition - it's a floppy. Now is it possible that the media gets destroyed if the hardware tries to seek to illegal positions?

Quoted 21 lines
Quoted 21 lines
Quoted 19 lines · Joseph Cheek

i've tried 2.4.7-ac10 and 2.4.9-ac10. same results. at boot i get:

Sep 17 11:02:48 seattle kernel: ide-floppy driver 0.97.sv
Sep 17 11:02:48 seattle kernel: hdd: No disk in drive
Sep 17 11:02:48 seattle kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps,

512
sector size, 2941 rpm

looks good, right? but i put a disk in and i get:

Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc =  0, key
=
2, asc = 30, ascq =  0
Sep 17 14:36:23 seattle kernel: ide-floppy: hdd: I/O error, pc = 1b, key
=
2, asc = 30, ascq =  0
Sep 17 14:36:23 seattle kernel: hdd: No disk in drive

not hardware, as it works in windows on the same machine.

#2 lore raw
In reply to Sam Varshavchik
Quoted 9 lines · Sam Varshavchik
Quoted 6 lines · Joseph Cheek

hmm, i went into windows *one more time* just to make sure it was still working, and not a hardware problem. well... looks like it doesn't work in windows either. must be hardware.

funny thing it shows up in dmesg and in "My Computer", just can't read from it.

That's pretty much what the sense codes below did indicate - media problem.

For future reference, is there any sort of tool that will decode these magic numbers, since the driver doesn't do it for us? It ought to cut down on the number of posts beginning, "my IDE driver began speaking in tongues, what is it trying to tell me?"

Signature · 2 lines
Mark H. Wood, Lead System Programmer   [email protected]
Make a good day.