RAID1 on TOP of LVM

Hi,

I have had LVM for a little while now.
I have even successfully extended an LV. Moved PVs. And better yet. Destroyed and recreated an LV containing Data :-) The final step, RAID1. But I stumbled.
Can someone help?

========= /etc/raidtab file =========
raiddev /dev/md0

        raid-level      1
        nr-raid-disks   2
        nr-spare-disks  0
        chunk-size      4

persistent-superblock 0
device /dev/MKP/1
failed-disk 0
device /dev/MKP.1/1
raid-disk 1

========= output of mkraid in single user mode =========

    # mkraid /dev/md0
    Hadling MD device /dev/md0
    analyzing super-block
    disk 0: /dev/MKP/1, failed

returned a status of 0.

    # mkraid --version
    mkraid version 0.90.0
    # uname -a
    Linux linux1.localdomain 2.4.3-20mdk #1 Sun Apr 15 23:03:10 CEST 2001 i686 unknown
            (Mandrake 8.0 distribution downloaded from web site).

========= the LVM info =========

Logical Volume Manager 0.9
Heinz Mauelshagen, Sistina Software 13/11/2000 (IOP 10)

vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "MKP"
vgscan -- found active volume group "MKP.1"
vgscan -- found active volume group "MGA"
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: you may not have an actual VGDA backup of your volume groups

lvscan -- ACTIVE           "/dev/MKP/1" [3.99 GB]
lvscan -- ACTIVE           "/dev/MGA/1" [2 GB]
lvscan -- ACTIVE           "/dev/MKP.1/1" [4 GB]

lvscan -- 3 logical volumes with 9.99 GB total in 3 volume groups lvscan -- 3 active logical volumes

pvscan -- reading all physical volumes (this may take a while...)

pvscan -- ACTIVE   PV "/dev/hda6"  of VG "MKP"   [2 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/hda10" of VG "MKP"   [2 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/hdc6"  of VG "MKP.1" [2.04 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/hdc10" of VG "MKP.1" [2.04 GB / 88 MB free]
pvscan -- ACTIVE   PV "/dev/hda7"  of VG "MGA"    [2 GB / 0 free]

pvscan -- total: 5 [10.09 GB] / in use: 5 [10.09 GB] / in no VG: 0 [0]

[EoInfo]

honestly i'd use lvm over raid1, it is most flexible since raid1 is not resizable.

Luca Berra -- [email protected]
        Communication Media & Services S.r.l.
 /"\
 \ /     ASCII RIBBON CAMPAIGN
  X        AGAINST HTML MAIL
 / \