Skip to contentSkip to conversation

2.4.10 and ipchains support.

DISCUSSION John Gluck 2 participants 2 messages Sep 30, 2001

lore
Share & tools
lore

John Gluck

author
#0 lore raw

Hi All

I have been trying to get ipchains support in the 2.4.10 kernel. I do a make xconfig and it's greyed out.
Has ipchains support been dropped and is this just an artifact??

Iptables support works but some of the modules have undefineds when they are loaded.
This symbol problem for iptables seems to come and go in 2.4.x kernels. I complie support into the kernel and everything else as modules.

John

#1 lore raw
Quoted 6 lines · John Gluck

Hi All

I have been trying to get ipchains support in the 2.4.10 kernel. I do a make xconfig and it's greyed out.
Has ipchains support been dropped and is this just an artifact??

Definitely not. RedHat 7.1 default install uses 2.4.2 kernel with ipchains. You can also say "service ipchains stop; rmmod ipchains; service iptables start" and switch without rebooting; The KEY is to remove all ipchains modules before loading the iptables ones. It works, I do this on a regular basis.

Quoted 5 lines

Iptables support works but some of the modules have undefineds when they are loaded.
This symbol problem for iptables seems to come and go in 2.4.x kernels. I complie support into the kernel and everything else as modules.

If the above does not solve your problem, make sure you are configuring the kernel properly. One easy way to do this is to take a working config - the kernel-source-2.4.XXX.i386.rpm from redhat 7.1 contains an extra directory /config with the actual .config files used to compile redhat kernels (BTW anyone know why I can't do rpm --rebuild with the kernels in RH7.1?) You should use these as an example. (or some other documentation) Once again, this DOES work (anyone- is there some issue specifically with 2.4.10?)