To SCSI driver maintainers: 16-byte CDB support in SCSI interface drivers
ac series kernels starting with 2.4.10-ac5 contain a patch that enables SCSI midlayer to send SCSI commands larger than 12 bytes to the interface
drivers. Before sending a larger command, midlayer will check the command size against Scsi_Host->max_cmd_len. If Scsi_Host->max_cmd_len is larger than or equal to the command size, the command will be sent to the interface driver else it will be terminated with an error. scsi_register() sets Scsi_Host->max_cmd_len to 12 by default for every interface. If a driver and the interface can support larger commands, the driver should set Scsi_Host->max_cmd_len to the correct value after calling scsi_register(). Please make this change to your driver if you would like to support larger SCSI commands. Non-ac kernels will not be affected by this change since Scsi_Host->max_cmd_len is unused on those kernels.
Signature · 6 lines
Khalid ==================================================================== Khalid Aziz Linux Systems Operation R&D (970)898-9214 Hewlett-Packard [email protected] Fort Collins, CO