Skip to contentSkip to conversation

problem with ide-scsi and IDE tape drive

DISCUSSION Pete Zaitcev 3 participants 3 messages Oct 30, 2001 – Oct 31, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 6 lines

I originally found this under 2.2.19, and upgraded to 2.4.13 to see if the problem was still there when running more recent code. It is.

mt -f $TAPE rewind
echo "tape 1" | dd conv=sync of=$TAPE bs=$hsize count=1

Quoted 6 lines

for x in 1 2 3; do
mt -f $TAPE rewind
dd if=$TAPE of=/dev/null bs=$hsize
date
tar -c -b 20 -f $TAPE /boot
done

Try "mt fsf" instead dd, see if that helps.

-- Pete

#2 lore raw
In reply to a message not in the archive
Quoted 14 lines · Pete Zaitcev
Quoted 7 lines

I originally found this under 2.2.19, and upgraded to 2.4.13 to see if the problem was still there when running more recent code. It is.

mt -f $TAPE rewind
echo "tape 1" | dd conv=sync of=$TAPE bs=$hsize count=1

Quoted 6 lines

for x in 1 2 3; do
mt -f $TAPE rewind
dd if=$TAPE of=/dev/null bs=$hsize
date
tar -c -b 20 -f $TAPE /boot
done

Quoted 3 lines

Try "mt fsf" instead dd, see if that helps.

-- Pete

dd is not guaranteed toposition you beyond the filemark after the first record. You have to be positioned beyond the filemark to start writing. Pete's suggestion is a good one. "mt fsf" will position the tape beyond the filemark and writing to the tape should work at that point.

Signature · 6 lines
Khalid

====================================================================
Khalid Aziz                              Linux Systems Operation R&D
(970)898-9214                                        Hewlett-Packard
[email protected]                                    Fort Collins, CO
#3 lore raw
Quoted 9 lines · Khalid Aziz
Quoted 1 line · Pete Zaitcev

Try "mt fsf" instead dd, see if that helps.

dd is not guaranteed toposition you beyond the filemark after the first record. You have to be positioned beyond the filemark to start writing. Pete's suggestion is a good one. "mt fsf" will position the tape beyond the filemark and writing to the tape should work at that point.

Thankyou for the suggestions. However, mt reports that the tape is positioned beyond the filemark before the failed write. Using "mt fsf" doesn't make any difference - the problem still occurs.

sfere# cat t
#! /bin/sh
set -e
TAPE=/dev/nst0
hsize=512

set -x

mt -f $TAPE rewind
echo "tape 1" | dd conv=sync of=$TAPE bs=$hsize count=1

for x in 1 2 3; do
mt -f $TAPE rewind
dd if=$TAPE of=/dev/null bs=$hsize
date
mt -f $TAPE status
tar -c -b 20 -f $TAPE /boot
done
sfere# ./t
+ mt -f /dev/nst0 rewind
+ echo 'tape 1'
+ dd conv=sync of=/dev/nst0 bs=512 count=1
0+1 records in
1+0 records out
+ mt -f /dev/nst0 rewind
+ dd if=/dev/nst0 of=/dev/null bs=512
1+0 records in
1+0 records out
+ date
Wed Oct 31 09:06:24 GMT 2001
+ mt -f /dev/nst0 status
drive type = Generic SCSI-2 tape
drive status = 1191182848
sense key error = 0
residue count = 0
file number = 1
block number = 0
Tape block size 512 bytes. Density code 0x47 (unknown). Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
+ tar -c -b 20 -f /dev/nst0 /boot
tar: Removing leading `/' from absolute path names in the archive
+ mt -f /dev/nst0 rewind
+ dd if=/dev/nst0 of=/dev/null bs=512
1+0 records in
1+0 records out
+ date
Wed Oct 31 09:06:59 GMT 2001
+ mt -f /dev/nst0 status
drive type = Generic SCSI-2 tape
drive status = 1191182848
sense key error = 0
residue count = 0
file number = 1
block number = 0
Tape block size 512 bytes. Density code 0x47 (unknown). Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
+ tar -c -b 20 -f /dev/nst0 /boot
tar: Removing leading `/' from absolute path names in the archive
tar: Cannot write to /dev/nst0: I/O error
tar: Error is not recoverable: exiting now

sfere# cat ./t
#! /bin/sh
set -e
TAPE=/dev/nst0
hsize=512

set -x

mt -f $TAPE rewind
echo "tape 1" | dd conv=sync of=$TAPE bs=$hsize count=1

for x in 1 2 3; do
mt -f $TAPE rewind
# dd if=$TAPE of=/dev/null bs=$hsize
mt -f $TAPE fsf
date
mt -f $TAPE status
tar -c -b 20 -f $TAPE /boot
done
sfere# ./t
+ mt -f /dev/nst0 rewind
+ echo 'tape 1'
+ dd conv=sync of=/dev/nst0 bs=512 count=1
0+1 records in
1+0 records out
+ mt -f /dev/nst0 rewind
+ mt -f /dev/nst0 fsf
+ date
Wed Oct 31 09:14:16 GMT 2001
+ mt -f /dev/nst0 status
drive type = Generic SCSI-2 tape
drive status = 1191182848
sense key error = 0
residue count = 0
file number = 1
block number = 0
Tape block size 512 bytes. Density code 0x47 (unknown). Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
+ tar -c -b 20 -f /dev/nst0 /boot
tar: Removing leading `/' from absolute path names in the archive
+ mt -f /dev/nst0 rewind
+ mt -f /dev/nst0 fsf
+ date
Wed Oct 31 09:14:52 GMT 2001
+ mt -f /dev/nst0 status
drive type = Generic SCSI-2 tape
drive status = 1191182848
sense key error = 0
residue count = 0
file number = 1
block number = 0
Tape block size 512 bytes. Density code 0x47 (unknown). Soft error count since last status=0
General status bits on (81010000):
EOF ONLINE IM_REP_EN
+ tar -c -b 20 -f /dev/nst0 /boot
tar: Removing leading `/' from absolute path names in the archive
tar: Cannot write to /dev/nst0: I/O error
tar: Error is not recoverable: exiting now
sfere#

ttfn/rjk