Skip to contentSkip to conversation

Identify IDE device?

DISCUSSION Mark Atwood 5 participants 5 messages Oct 31, 2001

lore
Share & tools
lore
#0 lore raw

Is there a way, via an ioctl call, or something to identify what specific IDE hard disk or other IDE device is hooked up to the IDE controller?

I'm really hoping to be able to determine something like "/dev/hda is a Maxtor 96147H6".

Signature · 2 lines
Mark Atwood   | I'm wearing black only until I find something darker.
[email protected] | http://www.pobox.com/~mra
#1 lore raw

Am Mittwoch, 31. Oktober 2001 01:52 schrieb Mark Atwood:

Quoted 3 lines

Is there a way, via an ioctl call, or something to identify what specific IDE hard disk or other IDE device is hooked up to the IDE controller?

What about

cat /proc/ide/hda/model

greetings

Christian Bornträger

#2 lore raw
In reply to Mark Atwood
Quoted 3 lines · Mark Atwood

Is there a way, via an ioctl call, or something to identify what specific IDE hard disk or other IDE device is hooked up to the IDE controller?

HDIO_GET_IDENTITY is the ioctl you seek.

Grab the hdparm source for an example of how to use this and other IDE related ioctls.

regards,

Dave.

Signature · 2 lines
| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs
#3 lore raw
In reply to Mark Atwood
Quoted 6 lines · Mark Atwood

Is there a way, via an ioctl call, or something to identify what specific IDE hard disk or other IDE device is hooked up to the IDE controller?

I'm really hoping to be able to determine something like "/dev/hda is a Maxtor 96147H6".

Something like
---cut
12:12:17 limbo ~$ cat /proc/ide/hd?/model
IC35L040AVER07-0
IBM-DTLA-307030
TOSHIBA DVD-ROM SD-M1212
CR-4804TE
12:12:19 limbo ~$
---cut
?

// /
....................................Timo Jantunen ......................
ZZZ (Used to represent :Kuunsäde 8 A 28: Email: [email protected] :
the sound of a person snoring.) :02210 Espoo : http://iki.fi/jeti :
Webster's Encyclopedic Unabridged :Finland : GSM+358-40-5763131 :
Dictionary of the English Language :...............:....................:

#4 lore raw
In reply to Mark Atwood

Hi!

Quoted 8 lines

Is there a way, via an ioctl call, or something to identify what specific IDE hard disk or other IDE device is hooked up to the IDE controller?

I'm really hoping to be able to determine something like "/dev/hda is a Maxtor 96147H6".

hdparm -i /dev/hda

// Stefan