Skip to contentSkip to conversation

ECS K7S5A bus problem may be causing file corruption

DISCUSSION Tom Zych 1 participant 1 message Nov 9, 2001

lore
Share & tools
lore

Tom Zych

author
#0 lore raw

(Apologies for munged address, I don't have a good spam solution yet. No need to CC me.)

There appears to be a marginal bus problem with some ECS K7S5A boards, which may be contributing to some of the file corruption problems people have reported. Try running Memtest86
( http://www.memtest86.com/ ) with the CPU (and possibly FSB) speed set to 100, then 133. If 100 is ok and 133 isn't, check out
http://65.66.90.193/K7S5A_Corruption_Fix_V131.pdf (warning: pdf) for details. My own machine exhibits completely reproducible errors using either or both DIMMS when the CPU/FSB speed is 133/133, and no errors at 100/100 or 100/133.

Memtest86 is run from a boot floppy and doesn't use the hard drives, so this is unrelated to the kernel / IDE. A couple of people have had trouble under Linux but not Windows, so this may not be the only issue. It should be eliminated on a given machine before testing kernel patches, though.

Hope this helps,

Signature · 2 lines
Tom Zych
[email protected]