Skip to contentSkip to conversation

Intel I860

DISCUSSION Achim Krümmel 11 participants 11 messages Nov 22, 2001 – Dec 9, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I have to setup a fast Linux Server for a database application. I would like to use a Mainboard for 2 Pentium4 CPUs for this. I found such a board with a Intel I860 chip. Is this chip supported by the current Kernel v2.4.14 or will I get problems with this board and Linux?

many thanks,

Achim Kruemmel

#1 lore raw
Quoted 8 lines · Achim Krümmel

Hi,

I have to setup a fast Linux Server for a database application. I would like to use a Mainboard for 2 Pentium4 CPUs for this. I found such a board with a Intel I860 chip. Is this chip supported by the current Kernel v2.4.14 or will I get problems with this board and Linux?

I haven't seen any other replies, so here goes.

You should have no problem using the 860 chipset AFAIK [but I don't have such a system :( ].

There are still some issues with interrupt balancing on SMP P4 systems. Last I heard, all interrupts will be routed to one CPU instead of [mostly] balanced between them (until this is fixed/patched).

HTH.
~Randy

#2 lore raw
In reply to Achim Krümmel

Achim-

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

Quoted 16 lines · Achim Krümmel

Hi,

I have to setup a fast Linux Server for a database application. I would like to use a Mainboard for 2 Pentium4 CPUs for this. I found such a board with a Intel I860 chip. Is this chip supported by the current Kernel v2.4.14 or will I get problems with this board and Linux?

many thanks,

Achim Kruemmel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 4 lines
Don Dugger
"Censeo Toto nos in Kansa esse decisse." - D. Gale
[email protected]
Ph: 303/652-0870x117
#3 lore raw

i believe he's referring to the 860 chipset, as in intel 810, ..., 840, 850, 860 ... the chipset that glues it all together, not the i860 processor.

and it's supported fine. i've got a couple running.

-josh

#4 lore raw
In reply to Achim Krümmel

Hi.

Quoted 5 lines

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

Quoted 13 lines

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

Quoted 7 lines · Achim Krümmel

Hi,

I have to setup a fast Linux Server for a database application. I would like to use a Mainboard for 2 Pentium4 CPUs for this. I found such a board with a Intel I860 chip. Is this chip supported by the current Kernel v2.4.14 or will I get problems with this board and Linux?

Intel 860 is the chipset used by the Xeon line of CPUs from Intel. Xeon aka Pentium 4 Xeon, the high end, MP version of the Pentium4 CPU.

No, nobody starts with me about differences and the definition of high end. :)

// Stefan

#5 lore raw
In reply to Achim Krümmel
Quoted 10 lines · On Mon, Nov 26, 2001 at 03:28:03PM -0700, [email protected] wrote:

Achim-

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

Uh? You're using the word i860 (the processor, I gather) and great in the same sentence, and not in combination with disaster?! That's a first... The i960 is fully ok, but the i860 was a pile of crap.

/David Weinehall
_ _
// David Weinehall <[email protected]> /> Northern lights wander \\

//  Maintainer of the v2.0 kernel   //  Dance across the winter sky //
\>  http://www.acc.umu.se/~tao/    </   Full colour fire           </
#6 lore raw
In reply to Achim Krümmel
Quoted 11 lines · On 20011126 [email protected] wrote:

Achim-

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

You are talking about intel i860 _processor_, and he asks about I860 chipset.

BTW, I always desired to put my hands on an i860. It is the only real good chip by Intel (it really looked like a Moto...). The only ones I used were inside an HP Graphics accelerator on a 9000/385.

Signature · 4 lines
J.A. Magallon                           #  Let the source be with you...        
mailto:[email protected]
Mandrake Linux release 8.2 (Cooker) for i586
Linux werewolf 2.4.16-pre1 #1 SMP Sun Nov 25 02:06:34 CET 2001 i686
#7 lore raw
Quoted 11 lines · J.A. Magallon
Quoted 8 lines · On 20011126 [email protected] wrote:

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

Quoted 6 lines

You are talking about intel i860 _processor_, and he asks about I860 chipset.

BTW, I always desired to put my hands on an i860. It is the only real good chip by Intel (it really looked like a Moto...). The only ones I used were inside an HP Graphics accelerator on a 9000/385.

You people are insane, but hey, it'd be cool to have i860 Linux. Maybe you don't realize just how unfit this chip is for normal UNIX-like use.

It's a RISC chip with the Pentium MMU. To get any speed out of it, you have to enable some strange features. First of all, you need the double-instruction mode. In every 64-bit chunk of memory you place 1 floating-point instruction and 1 integer instruction. Second of all, you need to enable pipelined FPU operation. This is an exposed pipeline, so watch out! Look what happens:

a = x + x
b = a + a <-- uses old value of "a", not x+x
nop
nop
nop
c = a + a

Yep, c!=a after this! Actually, "c" won't be set until a few instructions later because it too is still in the pipeline. You need a few dummy operations to push it out.

Now lets have a trap of some sort while that floating-point pipeline is full. The chip leaves itself in a horrible messy state that may well require thousands of lines of assembly code to sort out. I'm not kidding.

The chip made a fine DSP. You could put a few dozen together for radar.

#8 lore raw
Quoted 3 lines

You people are insane, but hey, it'd be cool to have i860 Linux. Maybe you don't realize just how unfit this chip is for normal UNIX-like use.

There already is an i860/i960 ucLinux port.

#9 lore raw
In reply to J.A. Magallon
Followup to:  <[email protected]>
By author:    "Albert D. Cahalan" <[email protected]>
In newsgroup: linux.dev.kernel
Quoted 15 lines

It's a RISC chip with the Pentium MMU. To get any speed out of it, you have to enable some strange features. First of all, you need the double-instruction mode. In every 64-bit chunk of memory you place 1 floating-point instruction and 1 integer instruction. Second of all, you need to enable pipelined FPU operation. This is an exposed pipeline, so watch out! Look what happens:

a = x + x
b = a + a <-- uses old value of "a", not x+x
nop
nop
nop
c = a + a

Quoted 4 lines

Yep, c!=a after this! Actually, "c" won't be set until a few instructions later because it too is still in the pipeline. You need a few dummy operations to push it out.

Nononon... it's much worse than that.

The i860 used a non-self-terminating pipeline, which meant that for each instruction you had "what to stuff into the pipeline at this stage" and "what to do with what comes out of the pipeline here", which means that to compute d = a + b - c you'd have to do something like:

X = a + b
nop
nop
nop
t = XXX
X = t - c
nop
nop
nop
d = XXX

... where X means don't care. To compute, say, h = e + f - g in parallel with this, it would look something like:

X = a + b
X = e + f
nop
nop
t = XXX
u = t - c
X = u - g
nop
nop
d = XXX
h = XXX

Note the instruction u = t - c, even though the left side and right side don't even belong to the same thread of execution...

-hpa

Signature · 3 lines
<[email protected]> at work, <[email protected]> in private!
"Unix gives you enough rope to shoot yourself in the foot."
http://www.zytor.com/~hpa/puzzle.txt	<[email protected]>
#10 lore raw
In reply to Achim Krümmel
Quoted 10 lines · [email protected] wrote:

Achim-

Uh, what exactly do you think you have here? The I860 was a completely new architecture that Intel dropped over 5 years ago. I've got one running Unix SVR4 in my basement but you can't buy an I860 motherboard today.

(For the record the 860 was a great architecture for the time and I'm still bitter that Intel dropped it but that's a different story.)

Yep. The i432, sorry the i860, sorry the Itanium is most definitely going to be the next great processor, with a long and solid future!

Regards,
Steve