Compile fixes for 2.5.1-pre4
Subsystems (2)
Jens/Linux,
Please find attached a patch on 2.5.1-pre4 with compile fixes for:
1. zftape code
2. ISDN divert code
3. Linear MD code
4. RAID-0 MD code
MvG/Best regards,
Gertjan
drivers/char/ftape/zftape/zftape-init.c +1 -1
@@ -114,7 +114,7 @@TRACE_FUN (ft_t_flow);TRACE (ft_t_flow,"called for minor %d" ,MINOR (ino->i_rdev)); - if ( test_and_set_bit(0,&busy_flag) )) { +if (test_and_set_bit (0 ,&busy_flag) ) {TRACE_ABORT (-EBUSY , ft_t_warn,"failed: already busy" ); } if ((MINOR(ino->i_rdev) & ~(ZFT_MINOR_OP_MASK | FTAPE_NO_REWIND))
drivers/isdn/divert/divert_procfs.c +2 -4
@@ -58,7 +58,6 @@else divert_info_tail->next = ib;/* follows existing messages */ divert_info_tail = ib;/* new tail */ -restore_flags (flags);/* delete old entrys */ while (divert_info_head->next) {
@@ -70,7 +69,7 @@ }else break ; }/* divert_info_head->next */ -spin_lock_irqrestore ( &divert_info_lock, flags ); +spin_unlock_irqrestore ( &divert_info_lock, flags );wake_up_interruptible (&(rd_queue)); }/* put_info_buffer */
@@ -163,14 +162,13 @@ inf->usage_cnt--; inf = inf->next; } -restore_flags (flags);if (if_used <=0 )while (divert_info_head) { inf = divert_info_head; divert_info_head = divert_info_head->next;kfree (inf); } -spin_unlock_irq ( &divert_info_lock, flags ); +spin_unlock_irqrestore ( &divert_info_lock, flags );return (0 ); }/* isdn_divert_close */
drivers/md/linear.c +6 -7
@@ -119,22 +119,21 @@return 0 ; } -static int linear_make_request (mddev_t *mddev, -int rw,struct buffer_head * bh) +static int linear_make_request (mddev_t *mddev,int rw,struct bio *bio) {linear_conf_t *conf =mddev_to_conf (mddev);struct linear_hash *hash;dev_info_t *tmp_dev;long block; - block = bh->b_rsector >>1 ; + block = bio->bi_sector >>1 ; hash = conf->hash_table + (block / conf->smallest->size);if (block >= (hash->dev0->size + hash->dev0->offset)) {if (!hash->dev1) {printk ("linear_make_request : hash->dev1==NULL for block %ld\n" , block); -buffer_IO_error (bh); +bio_io_error (bio);return 0 ; } tmp_dev = hash->dev1;
@@ -144,11 +143,11 @@if (block >= (tmp_dev->size + tmp_dev->offset) || block < tmp_dev->offset) {printk ("linear_make_request: Block %ld out of bounds on dev %s size %ld offset %ld\n" , block,kdevname (tmp_dev->dev), tmp_dev->size, tmp_dev->offset); -buffer_IO_error (bh); +bio_io_error (bio);return 0 ; } - bh->b_rdev = tmp_dev->dev; - bh->b_rsector = bh->b_rsector - (tmp_dev->offset <<1 ); + bio->bi_dev = tmp_dev->dev; + bio->bi_sector = bio->bi_sector - (tmp_dev->offset <<1 );return 1 ; }
drivers/md/raid0.c +8 -9
@@ -223,8 +223,7 @@* Of course, those facts may not be valid anymore (and surely won't...) * Hey guys, there's some work out there ;-) */ -static int raid0_make_request (mddev_t *mddev, -int rw,struct buffer_head * bh) +static int raid0_make_request (mddev_t *mddev,int rw,struct bio *bio) {unsigned int sect_in_chunk, chunksize_bits, chunk_size;raid0_conf_t *conf =mddev_to_conf (mddev);
@@ -235,11 +234,11 @@ chunk_size = mddev->param.chunk_size >>10 ; chunksize_bits =ffz (~chunk_size); - block = bh->b_rsector >>1 ; + block = bio->bi_sector >>1 ; hash = conf->hash_table + block / conf->smallest->size;/* Sanity check */ -if (chunk_size < (block % chunk_size) + (bh->b_size >>10 )) +if (chunk_size < (block % chunk_size) + (bio->bi_size >>10 )) goto bad_map;if (!hash)
@@ -255,7 +254,7 @@ }else zone = hash->zone0; - sect_in_chunk = bh->b_rsector & ((chunk_size<<1 ) -1 ); + sect_in_chunk = bio->bi_sector & ((chunk_size<<1 ) -1 ); chunk = (block - zone->zone_offset) / (zone->nb_dev << chunksize_bits); tmp_dev = zone->dev[(block >> chunksize_bits) % zone->nb_dev]; rsect = (((chunk << chunksize_bits) + zone->dev_offset)<<1 )
@@ -265,8 +264,8 @@* The new BH_Lock semantics in ll_rw_blk.c guarantee that this * is the only IO operation happening on this bh. */ - bh->b_rdev = tmp_dev->dev; - bh->b_rsector = rsect; + bio->bi_dev = tmp_dev->dev; + bio->bi_sector = rsect;/* * Let the main block layer submit the IO and resolve recursion:
@@ -274,7 +273,7 @@return 1 ; bad_map: -printk ("raid0_make_request bug: can't convert block across chunks or bigger than %dk %ld %d\n" , chunk_size, bh->b_rsector, bh->b_size >>10 ); +printk ("raid0_make_request bug: can't convert block across chunks or bigger than %dk %ld %d\n" , chunk_size, bio->bi_sector, bio->bi_size >>10 ); goto outerr; bad_hash:printk ("raid0_make_request bug: hash==NULL for block %ld\n" , block);
@@ -285,7 +284,7 @@ bad_zone1:printk ("raid0_make_request bug: hash->zone1==NULL for block %ld\n" , block); outerr: -buffer_IO_error (bh); +bio_io_error (bio);return 0 ; }
Quoted 2 lines · Gertjan van Wingerde
3. Linear MD code
4. RAID-0 MD code
Have you verified that it works, or are these just compile fixes?
Signature · 1 line
Jens Axboe
Quoted 9 lines · Jens Axboe
Quoted 3 lines · Gertjan van Wingerde
3. Linear MD code
4. RAID-0 MD codeHave you verified that it works, or are these just compile fixes?
They are just compile fixes. However, these are pretty simple conversions.
Signature · 11 lines
MvG, Gertjan ---------- Gertjan van Wingerde Geessinkweg 177 7544 TX Enschede The Netherlands E-mail: [email protected]
Quoted 8 lines · Gertjan van Wingerde
Quoted 6 lines · Jens Axboe
Quoted 3 lines · Gertjan van Wingerde
3. Linear MD code
4. RAID-0 MD code
Quoted 5 lines
Quoted 3 lines
Have you verified that it works, or are these just compile fixes?
They are just compile fixes. However, these are pretty simple conversions.
Note that there is no straight conversion between before having a 1-1 mapping between a buffer_head and a data element and now potentially a 1-n mapping with bio. If you are just remapping, no problem.
So I'd rather not take these patches unless you've looked into why it _does_ (or maybe does not) work. I'll make note to review them soon, ok?
Signature · 1 line
Jens Axboe
Quoted 19 lines · Jens Axboe
Quoted 10 lines · Gertjan van Wingerde
Quoted 7 lines · Jens Axboe
Quoted 4 lines · Gertjan van Wingerde
3. Linear MD code
4. RAID-0 MD codeQuoted 6 lines
Quoted 4 lines
Have you verified that it works, or are these just compile fixes?
They are just compile fixes. However, these are pretty simple conversions.
Quoted 8 lines
Note that there is no straight conversion between before having a 1-1 mapping between a
buffer_headand a data element and now potentially a 1-n mapping with bio. If you are just remapping, no problem.So I'd rather not take these patches unless you've looked into why it _does_ (or maybe does not) work. I'll make note to review them soon, ok?
Okay. BTW I'm currently setting up my machine to run some tests on this code (I'll have to find some current version of raidtools first :-(.
Signature · 11 lines
MvG, Gertjan ---------- Gertjan van Wingerde Geessinkweg 177 7544 TX Enschede The Netherlands E-mail: [email protected]
Quoted 11 lines · Gertjan van Wingerde
Quoted 8 lines
Note that there is no straight conversion between before having a 1-1 mapping between a
buffer_headand a data element and now potentially a 1-n mapping with bio. If you are just remapping, no problem.So I'd rather not take these patches unless you've looked into why it _does_ (or maybe does not) work. I'll make note to review them soon, ok?
Okay. BTW I'm currently setting up my machine to run some tests on this code (I'll have to find some current version of raidtools first :-(.
Excellent, thanks for doing this. We definitely need more people starting to pick up the pieces.
Signature · 1 line
Jens Axboe
Quoted 11 lines · Jens Axboe
Quoted 9 lines · Gertjan van Wingerde
Quoted 9 lines
Note that there is no straight conversion between before having a 1-1 mapping between a
buffer_headand a data element and now potentially a 1-n mapping with bio. If you are just remapping, no problem.So I'd rather not take these patches unless you've looked into why it _does_ (or maybe does not) work. I'll make note to review them soon, ok?
Quoted 7 lines
Quoted 2 lines
Okay. BTW I'm currently setting up my machine to run some tests on this code (I'll have to find some current version of raidtools first :-(.
Excellent, thanks for doing this. We definitely need more people starting to pick up the pieces.
Jens,
I've tested the linear and RAID-0 code in my own environment. The code survived some basic tests (starting, reading/writing, etc.) and some heavy-duty read-write tests.
Based on these tests I'd say that the patches are fine.
Signature · 11 lines
MvG, Gertjan ---------- Gertjan van Wingerde Geessinkweg 177 7544 TX Enschede The Netherlands E-mail: [email protected]
Quoted 3 lines · Gertjan van Wingerde
I've tested the linear and RAID-0 code in my own environment. The code survived some basic tests (starting, reading/writing, etc.) and some heavy-duty read-write tests.
Excellent, thanks a lot. Applied.
Signature · 1 line
Jens Axboe