Skip to contentSkip to conversation

problem with smb

DISCUSSION Thodoris Pitikaris 2 participants 2 messages Dec 19, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

In our institute we have a cluster system with 6 sytems that have the following configuration :

CPU: PIII 1GHZ/133 MHZ (DUAL)
MOTHER: Intel Server Board STL2 (intergrated Intel pro/100+ & Adaptec Ultra 160 SCSI) Chipset ServerWorks OSB4 NET CARD: 3COM Broadcom BCM5700 (Gigabit)
RAID Cont. : AMI MegaRAID (only in PBS server)
HDD: IBM Model: DDYS-T18350N
MEMORY: 512MB/133Mhz
OS: REDHAT 7.1 with Default Kernel (2.4.7)

What the problem is : The PBS server after some time freeze, with no error message from kernel Just freeze. We have changed everthing (even the tower) but nothing happened !

Is there any sugestions ?

Best Regards

--thodoris

#1 lore raw
Quoted 20 lines · Thodoris Pitikaris

Hi,

In our institute we have a cluster system with 6 sytems that have the following configuration :

CPU: PIII 1GHZ/133 MHZ (DUAL)
MOTHER: Intel Server Board STL2 (intergrated Intel pro/100+ & Adaptec Ultra 160 SCSI) Chipset ServerWorks OSB4 NET CARD: 3COM Broadcom BCM5700 (Gigabit)
RAID Cont. : AMI MegaRAID (only in PBS server)
HDD: IBM Model: DDYS-T18350N
MEMORY: 512MB/133Mhz
OS: REDHAT 7.1 with Default Kernel (2.4.7)

What the problem is : The PBS server after some time freeze, with no error message from kernel Just freeze. We have changed everthing (even the tower) but nothing happened !

Is there any sugestions ?

Best Regards

Quoted 9 lines

--thodoris

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Theodore,

You have to be a little bit more specific. You perceive that the PBS freezes. Obviously this means that console access is completely disabled. But are you sure that you can't for example ping the box, when console access is impossible? Also you might not see any messages on the console, but what about the /var/log files?

The hardware info is relevant, but can you also include the output of:

1)dmesg (After a reboot)
2)tail -300 /var/log/messages
3)modprobe -c
4)uname -a
5) cat /proc/pci
5)Write a script that will frequently execute the output of 'vmstat 3' to a file and then when the box crashes, reboot and include the file in your e-mail. This can help people track down something peculiar that happens just before the box dies?

Then people that can help will take it from there...

Regards,

Signature · 8 lines
George B. Magklaras BSc Hons CLE
Computer Security Researcher
The Network Research Group (http://ted.see.plymouth.ac.uk/nrg)
University of Plymouth, Devon, UK
Tel: +44-1752-233520

--
Personal URL: http://tornado.see.plym.ac.uk