Skip to contentSkip to conversation

Deadlock: Linux-2.2.18, sym53c8xx, Compaq ProLiant, HP Ultrium

DISCUSSION Manfred Spraul 2 participants 2 messages Dec 19, 2001 – Dec 20, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 7 lines

After that, the amanda process hangs in state "D" and cannot be killed anymore. The machine itself is still working.

If something is stuck in D state, always try sysrq-T.
This dumps the kernel stack of all processes. Check that the stuck process is logged (the kernel log can overflow if many processes are running), then parse the result through ksymoops. This shows you/us where it stuck.

--
Manfred

#1 lore raw

Hi!

Thank you for your reply!

Quoted 8 lines · Manfred Spraul
Quoted 8 lines

After that, the amanda process hangs in state "D" and cannot be killed anymore. The machine itself is still working.

Quoted 6 lines

If something is stuck in D state, always try sysrq-T. This dumps the kernel stack of all processes. Check that the stuck process is logged (the kernel log can overflow if many processes are running), then parse the result through ksymoops.
This shows you/us where it stuck.

Well, I know that. But as I mentioned im my mail, the machine currently runs "headless" (no keyboard, no monitor). And it's running in a server room several kilometers away from my office...

I decided to try a different SCSI controller first. We'll see then how it works...

Regards,

- andreas

Signature · 4 lines
Andreas Haumer                     | mailto:[email protected]
*x Software + Systeme              | http://www.xss.co.at/
Karmarschgasse 51/2/20             | Tel: +43-1-6060114-0
A-1100 Vienna, Austria             | Fax: +43-1-6060114-71