Kernel panic: Attempted to kill init!
hi all,
i am trying to boot the mpc860 board with ramdisk support. i downloaded pre built ramdisk.image.gz from ftp://ftp.denx.de/pub/LinuxPPC/usr/src/simple-ramdisk.image.gz
i put a printk in fs/opennamei () function
i end up with the following output.
is it crashing because of library missing or something else?
thanks in advance - srinivas
loaded at: 00200000 0020B598 relocated to: 00180000 0018B598 board data at: 001801D8 0018020C relocated to: 001F0100 001F0134 zimage at: 00208000 00249B2F initrd at: 00249B2F 002D5831 avail ram: 002D6000 00800000
Linux/PPC load: console=ttyS0,38400 root=/dev/ram Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.9 (pulipati@pulipati) (gcc version 2.95.2 19991024 (release)) #2 Fri Dec 21 18:19:15 IST 2001
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,38400 root=/dev/ram Decrementer Frequency = 150000000/60
Calibrating delay loop... 39.73 BogoMIPS
Memory: 6688k available (520k kernel code, 216k data, 32k init, 0k highmem)
Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes) Inode-cache hash table entries: 512 (order: 0, 4096 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 2048 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
Serial driver version 5.05c (2001-07-08) with no serial options enabled
block: 64 slots per queue, batch=8
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 559k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 32k initopen_namei(): trying to open /dev/consoleopen_namei(): trying to open /etc/ld.so.preload open_namei(): trying to open /etc/ld.so.cacheopen_namei(): trying to open /lib/libtermcap.so.2 open_namei(): trying to open /lib/libc.so.6open_namei(): trying to open /etc/nsswitch.conf open_namei(): trying to open /lib/libnss_compat.so.1 open_namei(): trying to open /usr/lib/libnss_compat.so.1 open_namei(): trying to open /lib/libnss_files.so.1 open_namei(): trying to open /usr/lib/libnss_files.so.1
Kernel panic: Attempted to kill init!
Rebooting in 60 seconds..
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 8 lines · In message <[email protected]> you wrote:
i downloaded pre built ramdisk.image.gz from ftp://ftp.denx.de/pub/LinuxPPC/usr/src/simple-ramdisk.image.gz
i put a printk in fs/opennamei () function
i end up with the following output.is it crashing because of library missing or something else?
Yes ;-)
Well, I think I should be a bit more helpful: something else is missing.
...
Quoted 1 line
Kernel panic: Attempted to kill init!
If you check the contents of tha ramdisk image (simply uncompress it and mount it using the loopback device) you will see that there is no "init" included.
Try passing a "init=/bin/sh" argument on the kernel commandline.
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] The speed of time is one second per second.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/