Skip to contentSkip to conversation

512 Mb DIMM not detected by the BIOS!

DISCUSSION Benny Sjostrand 7 participants 7 messages Feb 2, 2002 – Feb 7, 2002

lore
Share & tools
lore
#0 lore raw

Hello everyone!

I'm new to this mailinglist so please tellme if you think i'm "out of topoic".

I've have trouble with the following issue:
On two x86 machines, one AMD k62 and a Pentium the Bios dont wont to detect properly a 512 MB PC133 DIMM, the K62 based it dont detect it at all, and on the PII it detect it as a 128MB DIMM.
I suspect that's the BIOS that "sucks", not the HW, i supose that the HW is capable to deal with 512MB DIMM's, so my question to you "kernel-gurus", is there any posibility to configure the Linux kernel to bypass the BIOS and actually use my 512MB ?

Thanks!

/Benny

#1 lore raw
Quoted 1 line · Benny Sjostrand

Hello everyone!

Hello

Quoted 3 lines

so my question to you "kernel-gurus", is there any posibility to configure the Linux kernel to bypass the BIOS and actually use my 512MB ?

You don't need to be a "kernel-guru" to answer this question. The list of kernel boot parameters is in linux/Documentation/kernel-parameters.txt
There, you can find:

mem=nn[KMG] [KNL,BOOT] force use of a specific amount of
memory; to be used when the kernel is not able to see the whole system memory or for test.

So append mem=512M in your kernel command line. If you use lilo add append = "mem=512M" in your lilo.conf file (and rerun lilo).

Signature · 6 lines
** Gael Le Mignot "Kilobug", Ing3 EPITA - http://kilobug.free.fr **
Home Mail   : [email protected]          Work Mail : [email protected]
GSM         : 06.71.47.18.22 (in France)   ICQ UIN   : 7299959
Fingerprint : 1F2C 9804 7505 79DF 95E6 7323 B66B F67B 7103 C5DA

"Software is like sex it's better when it's free.", Linus Torvalds
#2 lore raw
In reply to Benny Sjostrand

Hey Benny,

This is a chipset problem. Chipsets support up to x CAS (column) lines and y RAS (row) lines, and depending on your DIMM memory module layout and configuration, you 512MB DIMM will be detected as a different sized module.

Eg. The venerable Intel 440BX (PII) chipset supports a max of 256MB per slot. Ah well.

Since it's a chipset (ie hardware) issue, it's not possible to work around this problem - you need a newer chipset. Sorry.

Dan

____________________
Daniel J Blueman

Quoted 18 lines

I'm new to this mailinglist so please tellme if you think i'm "out of topoic".

I've have trouble with the following issue:
On two x86 machines, one AMD k62 and a Pentium the Bios dont wont to detect properly a 512 MB PC133 DIMM, the K62 based it dont detect it at
all, and on the PII it detect it as a 128MB DIMM.
I suspect that's the BIOS that "sucks", not the HW, i supose that the HW
is capable to deal with 512MB DIMM's, so my question to you "kernel-gurus", is there any posibility to configure the Linux kernel to
bypass the BIOS and actually use my 512MB ?

Thanks!

/Benny

#3 lore raw
Quoted 7 lines · Daniel J Blueman

Date: Sat, 2 Feb 2002 21:25:44 -0000
From: Daniel J Blueman <[email protected]>
To: 'Benny Sjostrand' <[email protected]>, [email protected]
Subject: RE: 512 Mb DIMM not detected by the BIOS!

Hey Benny,

Quoted 8 lines

This is a chipset problem. Chipsets support up to x CAS (column) lines and y RAS (row) lines, and depending on your DIMM memory module layout and configuration, you 512MB DIMM will be detected as a different sized module.

Eg. The venerable Intel 440BX (PII) chipset supports a max of 256MB per slot. Ah well.

I had similar problem - on an Intel 440BX based motherboard (ABIT BX-133 RAID) the 256MB DIMMs I originally got were only 'half-detected' (e.g. I got only 128MB from each one); These DIMMs were working OK on some VIA-based systems; after changing them to a different type (both old and new were ECC DIMMs from Kingston, just different type) they are working OK.

I it could be of any help, I can find the part numbers/names of my DIMMs.

Quoted 2 lines

Since it's a chipset (ie hardware) issue, it's not possible to work around this problem - you need a newer chipset. Sorry.

Or maybe another DIMM type - at least I was able to successfully use 256MB DIMMs of appropriate type.

I also don't think kernel tricks would not get back the lost memory here.

Quoted 24 lines

Dan

____________________
Daniel J Blueman

Quoted 18 lines

I'm new to this mailinglist so please tellme if you think i'm "out of topoic".

I've have trouble with the following issue:
On two x86 machines, one AMD k62 and a Pentium the Bios dont wont to detect properly a 512 MB PC133 DIMM, the K62 based it dont detect it at
all, and on the PII it detect it as a 128MB DIMM.
I suspect that's the BIOS that "sucks", not the HW, i supose that the HW
is capable to deal with 512MB DIMM's, so my question to you "kernel-gurus", is there any posibility to configure the Linux kernel to
bypass the BIOS and actually use my 512MB ?

Thanks!

/Benny

#4 lore raw
In reply to Daniel J Blueman
Quoted 16 lines · Wojtek Pilorz
Quoted 8 lines

This is a chipset problem. Chipsets support up to x CAS (column) lines and y RAS (row) lines, and depending on your DIMM memory module layout and configuration, you 512MB DIMM will be detected as a different sized module.

Eg. The venerable Intel 440BX (PII) chipset supports a max of 256MB per slot. Ah well.

I had similar problem - on an Intel 440BX based motherboard (ABIT BX-133 RAID) the 256MB DIMMs I originally got were only 'half-detected' (e.g. I got only 128MB from each one); These DIMMs were working OK on some VIA-based systems; after changing them to a different type (both old and new were ECC DIMMs from Kingston, just different type) they are working OK.

Quoted 6 lines

I it could be of any help, I can find the part numbers/names of my DIMMs.

Quoted 2 lines

Since it's a chipset (ie hardware) issue, it's not possible to work around this problem - you need a newer chipset. Sorry.

Or maybe another DIMM type - at least I was able to successfully use 256MB DIMMs of appropriate type.

Double Sided 256MB Dimms are required, single sided dimms rarely work on BX-based boards.

Signature · 2 lines
Cliff Albert		| RIPE:	     CA3348-RIPE | www.oisec.net
[email protected]		| 6BONE:     CA2-6BONE	 | icq 18461740
#5 lore raw
Quoted 9 lines · Cliff Albert
Quoted 4 lines · Wojtek Pilorz
Quoted 2 lines

Since it's a chipset (ie hardware) issue, it's not possible to work around this problem - you need a newer chipset. Sorry.

Or maybe another DIMM type - at least I was able to successfully use 256MB DIMMs of appropriate type.

Double Sided 256MB Dimms are required, single sided dimms rarely work on BX-based boards.

I have to agree that requiring the correct part for memory is not
usually considered a "hardware issue" as most people see it.

I believe the VIA chipsets have similar features, the last m/b I
installed said it supported 4 DIMMs, up to 3GB. So a 1GB part will work, but if you put in four only three operate (I didn't have four to try).

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
#6 lore raw
In reply to Daniel J Blueman
Quoted 7 lines · Daniel J Blueman

Hey Benny,

This is a chipset problem. Chipsets support up to x CAS (column) lines and y RAS (row) lines, and depending on your DIMM memory module layout and configuration, you 512MB DIMM will be detected as a different sized module.

Quoted 5 lines

Eg. The venerable Intel 440BX (PII) chipset supports a max of 256MB per slot. Ah well.

Since it's a chipset (ie hardware) issue, it's not possible to work around this problem - you need a newer chipset. Sorry.

Additionally memory is generally and practically a setup once thing in every chipset I have looked at. Even if the chipsets supports it would be very difficult ``fix'' this afterwards.

Eric