Unbknown / uncomprehensible bug reported
Message from xconsole:
Feb 11 11:08:26 darkstar pppoe[547]: Linux select bug hit! This message
is harmless, but please ask the Linux kernel developers to fix it.
src/linux> sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux darkstar 2.4.4-4GB #1 Wed May 16 00:37:55 GMT 2001 i686 unknown
Gnu C 2.95.3 Gnu make 3.79.1 binutils 2.10.91.0.4 util-linux 2.11b mount 2.11b modutils 2.4.5 e2fsprogs 1.19 reiserfsprogs 3.x.0j pcmcia-cs 3.1.25 PPP 2.4.0 Linux C Library x 1 root root 1341670 Dec 18 16:50 /lib/libc.so.6 Dynamic linker (ldd) 2.2.2 Procps 2.0.7 Net-tools 1.60 Kbd 1.04 Sh-utils 2.0 Modules Loaded snd-pcm-oss snd-pcm-plugin snd-mixer-oss tuner
tvaudio msp3400 bttv i2c-algo-bit i2c-core videodev ipv6 af_packet n_hdlc ppp_synctty ppp_async ppp_generic snd-card-via686a snd-pcm snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore parport_pc lp parport printer mousedev hid input usb-uhci usbcore ipchains 3c90x rtl8139 tmscsim
cat /proc/version:
Linux version 2.4.4-4GB ([email protected]) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed May 16 00:37:55 GMT 2001
src/linux> cat /proc/cpuinfo
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Athlon(tm) Processor
stepping : 1
cpu MHz : 935.979
cache size : 64 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1867.77
src/linux> cat /proc/modules
snd-pcm-oss 18816 1 (autoclean) snd-pcm-plugin 15024 0 (autoclean) [snd-pcm-oss] snd-mixer-oss 5120 1 (autoclean) [snd-pcm-oss] tuner 4144 1 (autoclean) tvaudio 8064 0 (autoclean) (unused) msp3400 13488 1 (autoclean) bttv 54800 0 (autoclean) i2c-algo-bit 7200 1 (autoclean) [bttv] i2c-core 12400 0 (autoclean) [tuner tvaudio msp3400 bttv i2c-algo-bit] videodev 4576 2 (autoclean) [bttv] ipv6 126272 -1 (autoclean) af_packet 11648 2 (autoclean) n_hdlc 6256 1 ppp_synctty 5040 1 ppp_async 6480 0 (unused) ppp_generic 14416 3 [ppp_synctty ppp_async] snd-card-via686a 7328 2 snd-pcm 30560 0 [snd-pcm-oss snd-pcm-plugin snd-card-via686a] snd-timer 8560 0 [snd-pcm] snd-ac97-codec 24576 0 [snd-card-via686a] snd-mixer 24224 0 [snd-mixer-oss snd-ac97-codec] snd-mpu401-uart 2512 0 [snd-card-via686a] snd-rawmidi 9664 0 [snd-mpu401-uart] snd-seq-device 4032 0 [snd-rawmidi] snd 34032 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-via686a snd-pcm snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3632 4 [snd] parport_pc 18480 1 (autoclean) lp 5392 0 (autoclean) parport 24352 1 (autoclean) [parport_pc lp] printer 4960 0 mousedev 4032 0 (unused) hid 11760 0 (unused) input 3168 0 [mousedev hid] usb-uhci 21840 0 (unused) usbcore 47120 1 [printer hid usb-uhci] ipchains 33408 0 (unused) 3c90x 24256 1 rtl8139 11520 1 tmscsim 29888 0 (unused)
src/linux> cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0320-0321 : VIA 82C686A - MPU401
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0400-040f : PCI device 1106:3057
0778-077a : parport0
0800-08ff : PCI device 1106:3057
0c00-0c7f : PCI device 1106:3057
0cf8-0cff : PCI conf1
7000-8fff : PCI Bus #01
8800-88ff : PCI device 1002:5046
b400-b47f : PCI device 10b7:9055
b400-b47f : eth1
b800-b8ff : PCI device 10ec:8139
b800-b8ff : 8139too
bc00-bc1f : PCI device 1106:3038
bc00-bc1f : usb-uhci
c000-c01f : PCI device 1106:3038
c000-c01f : usb-uhci
c400-c403 : PCI device 1106:3058
c400-c403 : VIA 82C686A - MPU401 config
c800-c803 : PCI device 1106:3058
cc00-ccff : PCI device 1106:3058
cc00-ccff : VIA 82C686A - AC'97
d000-d07f : PCI device 1022:2020
d000-d07f : tmscsim
ffa0-ffaf : PCI device 1106:0571
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
src/linux> cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-002327d1 : Kernel code
002327d2-0031bdcb : Kernel data
0fff0000-0fff7fff : ACPI Tables
0fff8000-0fffffff : ACPI Non-volatile Storage
d7c00000-dfcfffff : PCI Bus #01
d8000000-dbffffff : PCI device 1002:5046
dfdfc000-dfdfcfff : PCI device 109e:036e
dfdfc000-dfdfcfff : bttv
dfdfd000-dfdfdfff : PCI device 109e:0878
dfe00000-dfefffff : PCI Bus #01
dfefc000-dfefffff : PCI device 1002:5046
dffefe80-dffefeff : PCI device 10b7:9055
dffeff00-dffeffff : PCI device 10ec:8139
dffeff00-dffeffff : 8139too
e0000000-e3ffffff : PCI device 1106:0691
ffff0000-ffffffff : reserved
darkstar /home/axel# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable)[size=64M] Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00007000-00008fff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: d7c00000-dfcfffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset-
FastB2B- Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA
Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at bc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 20)
Subsystem: Giga-byte Technology: Unknown device a000
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at cc00 [size=256]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=128]
Expansion ROM at dfff0000 [disabled] [size=64K]
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at dffeff00 (32-bit, non-prefetchable)
[size=256]
Expansion ROM at dffd0000 [disabled] [size=64K]
00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b400 [size=128]
Region 1: Memory at dffefe80 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 (rev
02)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfdfc000 (32-bit, prefetchable) [size=4K]
00:0f.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV/GO
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfdfd000 (32-bit, prefetchable) [size=4K]
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0014
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at d8000000 (32-bit, prefetchable)[size=64M] Region 1: I/O ports at 8800 [size=256]
Region 2: Memory at dfefc000 (32-bit, non-prefetchable)
[size=16K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
darkstar /home/axel# ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:FC:3C:0C:34
inet addr:192.168.100.1 Bcast:192.168.100.255
Mask:255.255.255.0
inet6 addr: fe80::250:fcff:fe3c:c34/10 Scope:Link
inet6 addr: fe80::50:fc3c:c34/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:417 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:100417 (98.0 Kb)
Interrupt:9 Base address:0xdf00eth1 Link encap:Ethernet HWaddr 00:01:02:E0:AA:EF
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1:2e0:aaef/10 Scope:Link
inet6 addr: fe80::201:2ff:fee0:aaef/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39528 errors:0 dropped:0 overruns:0 frame:0
TX packets:41294 errors:0 dropped:0 overruns:0 carrier:0
collisions:3 txqueuelen:100
RX bytes:30614946 (29.1 Mb) TX bytes:3013501 (2.8 Mb)
Interrupt:10 Base address:0xb400lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:107 errors:0 dropped:0 overruns:0 frame:0 TX packets:107 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0
RX bytes:7630 (7.4 Kb) TX bytes:7630 (7.4 Kb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:80.14.48.238 P-t-P:80.14.48.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:11955 errors:14264 dropped:0 overruns:0 frame:0
TX packets:12861 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:5728423 (5.4 Mb) TX bytes:754200 (736.5 Kb)darkstar /home/axel# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: E.08
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: TEAC Model: CD-R56S4 Rev: 1.0F
Type: CD-ROM
/var/log/messages:
Feb 11 11:07:06 darkstar pppd[546]: LCP terminated by peer Feb 11 11:07:06 darkstar pppd[546]: cbcp_lowerdown Feb 11 11:07:06 darkstar pppd[546]: Script /etc/ppp/ip-down started (pid 3603) Feb 11 11:07:06 darkstar pppd[546]: sent [LCP TermAck id=0x65] Feb 11 11:07:06 darkstar pppd[546]: Script /etc/ppp/ip-down finished (pid 3603), status = 0x0 Feb 11 11:07:08 darkstar pppd[546]: Connection terminated. Feb 11 11:07:08 darkstar pppd[546]: Connect time 1438.7 minutes. Feb 11 11:07:08 darkstar pppd[546]: Sent 1086929 bytes, received 8413654 bytes. Feb 11 11:07:08 darkstar pppd[546]: Couldn't release PPP unit: Inappropriate ioctl for device Feb 11 11:07:08 darkstar pppd[546]: Waiting for 1 child processes... Feb 11 11:07:08 darkstar pppd[546]: script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth1 -T 80 -U -s -m 1412 , pid 547 Feb 11 11:08:26 darkstar pppoe[547]: Linux select bug hit! This message is harmless, but please ask the Linux kernel developers to fix it. Feb 11 11:08:26 darkstar pppoe[547]: Sent PADT Feb 11 11:08:26 darkstar pppd[546]: Script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth1 -T 80 -U -s -m 1412 finished (pid 547), status = 0x100 Feb 11 11:08:26 darkstar pppd[546]: Exit. Feb 11 11:08:26 darkstar adsl-connect: ADSL connection lost; attempting re-connection. Feb 11 11:08:31 darkstar pppd[3652]: pppd 2.4.0 started by root, uid 0 Feb 11 11:08:31 darkstar pppd[3652]: using channel 2 Feb 11 11:08:31 darkstar pppd[3652]: Using interface ppp0 Feb 11 11:08:31 darkstar pppd[3652]: Connect: ppp0 <--> /dev/pts/0 Feb 11 11:08:31 darkstar pppoe[3653]: Changed pty line discipline to N_HDLC for synchronous mode Feb 11 11:08:31 darkstar pppoe[3653]: PADS: Service-Name: '' Feb 11 11:08:31 darkstar pppoe[3653]: PPP session is 15442
Hope this helps, if not, contact me!
Axel
Signature · 3 lines
------------------------------ "Science is the game we play with god to find out his rules." ------------------------------
Quoted 5 lines · axel
Linux version 2.4.4-4GB ([email protected]) (gcc version 2.95.3
...Feb 11 11:08:26 darkstar pppoe[547]: Linux select bug hit! This messageis harmless, but please ask the Linux kernel developers to fix it.
An update went into drivers/char/n_hdlc.c in kernel 2.4.18-pre1 which should have fixed this.
-
Quoted 2 lines · axel
Feb 11 11:08:26 darkstar pppoe[547]: Linux select bug hit! This messageis harmless, but please ask the Linux kernel developers to fix it.
See http://marc.theaimsgroup.com/?l=linux-kernel&m=101202998703738&w=2
(or search "select bug hit pppoe" on LKML archives)
Signature · 2 lines
Martin Mačok http://underground.cz/ [email protected] http://Xtrmntr.org/ORBman/