Skip to contentSkip to conversation

lockup on dual athlon system.

DISCUSSION Ben Greear 2 participants 2 messages Feb 25, 2002

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

I can repeatedly lockup my TYAN 2460 motherboard with dual athlon MP 1600s by running make -j 4 modules (ie build linux)

I'm running the 2.4.18-rc1 kernel with SMP + Athlon optimizations.

sysreq will not print anything out when it locks, and I've seen it lock both in the console and with X running. I'm not sure how to go about debugging this any farther, but will be happy to run tests or gather information if anyone can suggest something...

Thanks,
Ben

Signature · 3 lines
Ben Greear <[email protected]>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear
#1 lore raw

mlock + OOM = infinite loop

I have a dual Athlon 1.2Ghz box with 1.2G of memory, I decided to run 2 copies of memtest to test the memory with each testing 629M (the existance of memtest86 slipped my mind). With the 2.4.17 and 2.4.18-rc2 kernels (Andre's IDE amd kdb patches applied) the kernel loops trying to free memory so the second mlock can succeed which never happens, I let it run for about 2 days while I was away and it never became responsive, minus kdb.

But with Rik's rmap12a patch it successfully starts the OOM and kills one of the memtest processes, the only strange thing is it kills the first instance letting the second succeed, I would think it would be nicer to just fail in the second mlock and let the first continue.

Also all the kernels were compiled with SMP support, if that makes a difference.

Jim