AZT2320 needs two modprobes
Hi.
I have a AZT3000 (pnp) sound card.
I successfully (after many trials and errors) installed the latest beta version of ALSA.
I tried modprobe after modprobing isa-pnp kernel module and configuring isapnp.
So the order is:
1. modprobe isa-pnp
2. cat /etc/isapnp > /proc/isa-pnp (or similar)
3. modprobe snd-card-azt2320 snd_port=0x530 (and others)
(Note. When I did not specify snd_port=0x530, it gave me a "No such device" error. snd_port=0x534 also gave me the same error.)
PROBLEM:
----------
The problem is that when I first modprobe after booting, I get "no device" error. But the second modprobe works well. So now I have to modprobe twice whenever I want to use sound. And I can't avoid an ugly sequence of error message, too.
Any hint?
Some more details:
--------------------
Distribution: Slackware
Kernel version: 2.4.18
ALSA driver version: 0.5.12a
Configure option: ./configure --with-isa-pnp=no --with-cards=azt2320 (or something like that)
I want to use kernel isa-pnp module (instead of ALSA's isapnp module) in order to migrate 2.5.5+ kernel eventually. I suspect that ALSA's pnp module will work with no problem. Actually "kernel 2.4.5 + AlSA 0.5.10b + ALSA isapnp" worked perfectly.
CH
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
hello,
./configure ... --with-isapnp=yes ...
massimo
Quoted 28 lines · CH
Hi.
I have a AZT3000 (pnp) sound card.
I successfully (after many trials and errors) installed the latest beta version of ALSA.I tried modprobe after modprobing isa-pnp kernel module and configuring isapnp.
So the order is:
1. modprobe isa-pnp
2. cat/etc/isapnp>/proc/isa-pnp(or similar)
3. modprobe snd-card-azt2320 snd_port=0x530 (and others)
(Note. When I did not specify snd_port=0x530, it gave me a "No such device" error. snd_port=0x534 also gave me the same error.)PROBLEM:
----------
The problem is that when I first modprobe after booting, I get "no device" error. But the second modprobe works well. So now I have to modprobe twice whenever I want to use sound. And I can't avoid an ugly sequence of error message, too.Any hint?
Some more details:
--------------------Distribution: Slackware
Kernel version: 2.4.18
ALSA driver version: 0.5.12a
Configure option: ./configure --with-isa-pnp=no --with-cards=azt2320 (or something like that)I want to use kernel isa-pnp module (instead of ALSA's isapnp module) in order to migrate 2.5.5+ kernel eventually. I suspect that ALSA's pnp module will work with no problem. Actually "kernel 2.4.5 + AlSA 0.5.10b + ALSA isapnp" worked perfectly.
Quoted 8 lines
CH
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel