Skip to contentSkip to conversation

kernel-compile error for walnut with 2.4.18 ?

Q Kim young-kyun 3 participants 3 messages Mar 21, 2002

lore
Share & tools
lore

Kim young-kyun

author
#0 lore raw

Hi, all.

I try to comile kernel 2.4.18 for walnut(IBM PowerPC 405GP) board on Red-Hat 7.1.
I met below error message and I cannot solve this problem.

powerpc-linux-gcc -D__KERNEL__ -I/home/elecguy/work/ppclinux/linux-2.4.18/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -D__powerpc__ -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -Wa,-m403 -mcpu=403 -DKBUILD_BASENAME=ppc4xx_pic -c -o ppc4xx_pic.o ppc4xx_pic.c
{standard input}: Assembler messages:
{standard input}:83: Error: unsupported relocation against DCRN_EXISR {standard input}:84: Error: unsupported relocation against DCRN_EXIER {standard input}:111: Error: unsupported relocation against DCRN_EXIER {standard input}:128: Error: unsupported relocation against DCRN_EXIER {standard input}:145: Error: unsupported relocation against DCRN_EXIER {standard input}:149: Error: unsupported relocation against DCRN_EXISR {standard input}:64: Error: unsupported relocation against DCRN_EXIER

Cross-compiler is builded by following order.

1) binutils-2.12.90.0.1
./configure --target=powerpc-linux --with-cpu=403
make; make install

2) gcc-core-2.95.3
./configure --target=powerpc-linux --enable-shared --enable-languages=c --with-newlib --with-cpu=403
make; make install

linux-2.4.18 with ppc-patch-2.4.18
*in Makefile
ARCH := ppc
CROSS_COMPILE=powerppc-linux-
AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS) -Wa,-m403
*in arch/ppc/Makefile
CFLAGS := (Original flags)... -Wa,-m403
*in make menuconfig
Processor Type -> 4xx
Machine Type -> Walnut

What's wrong?

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 44 lines · Kim young-kyun

Hi, all.

I try to comile kernel 2.4.18 for walnut(IBM PowerPC 405GP) board on Red-Hat 7.1.
I met below error message and I cannot solve this problem.

powerpc-linux-gcc -D__KERNEL__

(quoted diff) +0 -5
-I/home/elecguy/work/ppclinux/linux-2.4.18/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -D__powerpc__ -fsigned-char
-msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring
-Wa,-m403 -mcpu=403 -DKBUILD_BASENAME=ppc4xx_pic -c -o ppc4xx_pic.o

ppc4xx_pic.c
{standard input}: Assembler messages:
{standard input}:83: Error: unsupported relocation against DCRN_EXISR {standard input}:84: Error: unsupported relocation against DCRN_EXIER {standard input}:111: Error: unsupported relocation against DCRN_EXIER {standard input}:128: Error: unsupported relocation against DCRN_EXIER {standard input}:145: Error: unsupported relocation against DCRN_EXIER {standard input}:149: Error: unsupported relocation against DCRN_EXISR {standard input}:64: Error: unsupported relocation against DCRN_EXIER

Cross-compiler is builded by following order.

1) binutils-2.12.90.0.1
./configure --target=powerpc-linux --with-cpu=403
make; make install

2) gcc-core-2.95.3
./configure --target=powerpc-linux --enable-shared --enable-languages=c --with-newlib --with-cpu=403
make; make install

linux-2.4.18 with ppc-patch-2.4.18
*in Makefile
ARCH := ppc
CROSS_COMPILE=powerppc-linux-
AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS) -Wa,-m403
*in arch/ppc/Makefile
CFLAGS := (Original flags)... -Wa,-m403
*in make menuconfig
Processor Type -> 4xx
Machine Type -> Walnut

Quoted 6 lines

What's wrong?

Try a newer kernel. DCRN_EXIER is an older implimentaion and is only used on any 403 cpus. Your -m403 looks fishy, we are usin -m405 & -mcpu=405

armin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 46 lines · Armin
Quoted 44 lines · Kim young-kyun

Hi, all.

I try to comile kernel 2.4.18 for walnut(IBM PowerPC 405GP) board on Red-Hat 7.1.
I met below error message and I cannot solve this problem.

powerpc-linux-gcc -D__KERNEL__

(quoted diff) +0 -5
-I/home/elecguy/work/ppclinux/linux-2.4.18/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common -D__powerpc__ -fsigned-char
-msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring
-Wa,-m403 -mcpu=403 -DKBUILD_BASENAME=ppc4xx_pic -c -o ppc4xx_pic.o

ppc4xx_pic.c
{standard input}: Assembler messages:
{standard input}:83: Error: unsupported relocation against DCRN_EXISR {standard input}:84: Error: unsupported relocation against DCRN_EXIER {standard input}:111: Error: unsupported relocation against DCRN_EXIER {standard input}:128: Error: unsupported relocation against DCRN_EXIER {standard input}:145: Error: unsupported relocation against DCRN_EXIER {standard input}:149: Error: unsupported relocation against DCRN_EXISR {standard input}:64: Error: unsupported relocation against DCRN_EXIER

Cross-compiler is builded by following order.

1) binutils-2.12.90.0.1
./configure --target=powerpc-linux --with-cpu=403
make; make install

2) gcc-core-2.95.3
./configure --target=powerpc-linux --enable-shared --enable-languages=c --with-newlib --with-cpu=403
make; make install

linux-2.4.18 with ppc-patch-2.4.18
*in Makefile
ARCH := ppc
CROSS_COMPILE=powerppc-linux-
AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS) -Wa,-m403
*in arch/ppc/Makefile
CFLAGS := (Original flags)... -Wa,-m403
*in make menuconfig
Processor Type -> 4xx
Machine Type -> Walnut

Quoted 4 lines
Quoted 1 line

What's wrong?

Try a newer kernel. DCRN_EXIER is an older implimentaion and is only used on any 403 cpus. Your -m403 looks fishy, we are usin -m405 & -mcpu=405

Yes, this appears to be stock 2.4.18. Check out
http://penguinppc.org/dev/kernel.shtml

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/