format specification problem
[ those of you on jack-dev will have seen this coming ]
ALSA doesn't seem to provide a way for a driver to way "i provide samples in the native format of the processor". The specific case in point that I'm noticing is the Hammerfall, where we currently say that it supports S32_LE. This is not strictly true. It supports S32_LE when it has the x86-friendly EPROM, and S32_BE when it has the ppc-friendly EPROM. But it can't support them both at the same time. Moreover, there isn't any way to find out which EPROM it has - its assumed that the user is sufficiently smart not to have installed a PPC version on an x86 system (I actually had a user recently who had this problem and didn't realize it - they spent days trying to figure why their samples were byte-swapped).
If an application wants to ask for S32 in "native" format, it can do that, but <alsa/asoundlib.h> will convert that into either S32_LE or S32_BE, and when we get down the driver level, it will fail on some systems.
How can we address this? I doubt that the Hammerfall is the only card with this problem ...
--p
Quoted 15 lines · Paul Davis
[ those of you on jack-dev will have seen this coming ]
ALSA doesn't seem to provide a way for a driver to way "i provide samples in the native format of the processor". The specific case in point that I'm noticing is the Hammerfall, where we currently say that it supports
S32_LE. This is not strictly true. It supportsS32_LEwhen it has the x86-friendly EPROM, andS32_BEwhen it has the ppc-friendly EPROM. But it can't support them both at the same time. Moreover, there isn't any way to find out which EPROM it has - its assumed that the user is sufficiently smart not to have installed a PPC version on an x86 system (I actually had a user recently who had this problem and didn't realize it - they spent days trying to figure why their samples were byte-swapped).
Quoted 8 lines
If an application wants to ask for S32 in "native" format, it can do that, but <
alsa/asoundlib.h> will convert that into eitherS32_LEorS32_BE, and when we get down the driver level, it will fail on some systems.How can we address this? I doubt that the Hammerfall is the only card with this problem ...
Actually they're two different cards, so they need to be treated as such. I think that a module option is a suitable solution.
Signature · 8 lines
Abramo Bagnara mailto:[email protected] Opera Unica Phone: +39.546.656023 Via Emilia Interna, 140 48014 Castel Bolognese (RA) - Italy ALSA project http://www.alsa-project.org It sounds good!
At Wed, 24 Apr 2002 20:55:56 -0400,
Quoted 16 lines · Paul Davis
[ those of you on jack-dev will have seen this coming ]
ALSA doesn't seem to provide a way for a driver to way "i provide samples in the native format of the processor". The specific case in point that I'm noticing is the Hammerfall, where we currently say that it supports
S32_LE. This is not strictly true. It supportsS32_LEwhen it has the x86-friendly EPROM, andS32_BEwhen it has the ppc-friendly EPROM. But it can't support them both at the same time. Moreover, there isn't any way to find out which EPROM it has - its assumed that the user is sufficiently smart not to have installed a PPC version on an x86 system (I actually had a user recently who had this problem and didn't realize it - they spent days trying to figure why their samples were byte-swapped).
Quoted 4 lines
If an application wants to ask for S32 in "native" format, it can do that, but <
alsa/asoundlib.h> will convert that into eitherS32_LEorS32_BE, and when we get down the driver level, it will fail on some systems.
simply use SNDRV_PCM_FORMAT_S32 (without _LE/_BE suffix) ? then the byte-order is determined at the compile time.
but i vote for Abramo's proposal, since the mismatching may happen as you wrote. it should be configurable via module option or something like that.
Takashi