Raidstop /dev/md0 won't work
this is probably a very dumb question.. however I am not able to raidstop my raid-array using, which i need to do before running raidreconf.
%> raidstop /dev/md0/dev/md0: Device or resource busy.
%>
any suggestions... i have already tried unmounting the device.
thanks.
Quoted 7 lines · Scott Walter
this is probably a very dumb question.. however I am not able to raidstop my raid-array using, which i need to do before running raidreconf.
%> raidstop
/dev/md0/dev/md0: Device or resource busy.
%>
try doing fuser -m on /dev/md0 to see which processes are using it...
# fuser -m /dev/md0 /dev/md0: 8685c
then us ps to figure out what's up
---
Derek Vadala, [email protected], http://www.cynicism.com/~derek
Quoted 9 lines · On Thursday May 2, [email protected] wrote:
this is probably a very dumb question.. however I am not able to raidstop my raid-array using, which i need to do before running raidreconf.
%> raidstop
/dev/md0/dev/md0: Device or resource busy.
%>any suggestions... i have already tried unmounting the device.
This is a bug in raidstop. If you strace you will notice that it opens it twice and before trying to ioctl(STOP...) it.
Upgrade raidtools or use mdadm.
And a quick and dirty:
mv /dev/md0 /dev/mdx
mv /dev/md1 /dev/md0
mv /dev/mdx /dev/md0
raidstop /dev/md1
mv /dev/md0 /dev/mdx
mv /dev/md1 /dev/md0
mv /dev/mdx /dev/md0
should work.
NeilBrown
Quoted 9 lines
thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html