Skip to contentSkip to conversation

CS4236 problems

DISCUSSION Thomas Petersen 2 participants 3 messages May 9, 2002 – May 13, 2002

lore
Share & tools
lore
#0 lore raw

I'm having lots of problems getting the cs4236 driver to work. I started out with the 0.9.0rc1 package. The snd-cs4236.o module wouldn't load. It just resulted in a message like "kernel: CS4236+ soundcard not found or device busy" in the system log.
Then i found out that the cs4236 driver was missing the pnp id of my card. I gathered the information from /proc/isapnp and added the line:
ISAPNP_CS4232('C','S','C',0xe936,0x0000,0x0010,0x0003),
to the list of pnpids in cs4236.c
Now the module could load, and I could even play some music... problem was now, that the sound wasn't audible. I turned up the volume for all channels in alsamixer and that actually made a difference. Now i could hear the music but extremely low. It is like the output is muted or something needs to be turned up. Also in a program like "kmix" the master volume is missing... strange.

Today i have tried with a cvs snapshot from 8th may. To get the module to load i did the same as before but i additionally had to uncomment the lines:

if (ver1 != ver2) {
    snd_printk("CS4236+ chip detected, but control port 0x%lx is not
 valid\n", cport);
    snd_device_free(card, chip);
    return -ENODEV;
}

in cs4236_lib.c. Otherwise it would just always give that message in the log when loading the module. I now have the same result as before.

In addition to the cs4236 card i also have a Terratec 128i (ESS Solo-1, snd-es1938.o) which is working perfectly with alsa. The cs4236 is working correctly with OSS using the cs4232 driver.

I can supply more information on request like contents of /proc/isapnp and stuff like that. Just ask!

Thomas Petersen

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]

#1 lore raw

At Thu, 09 May 2002 18:57:48 +0200,

Quoted 19 lines · Thomas Petersen

I'm having lots of problems getting the cs4236 driver to work. I started out with the 0.9.0rc1 package. The snd-cs4236.o module wouldn't load. It just resulted in a message like "kernel: CS4236+ soundcard not found or device busy" in the system log.
Then i found out that the cs4236 driver was missing the pnp id of my card. I gathered the information from /proc/isapnp and added the line:
ISAPNP_CS4232('C','S','C',0xe936,0x0000,0x0010,0x0003),
to the list of pnpids in cs4236.c
Now the module could load, and I could even play some music... problem was now, that the sound wasn't audible. I turned up the volume for all channels in alsamixer and that actually made a difference. Now i could hear the music but extremely low. It is like the output is muted or something needs to be turned up. Also in a program like "kmix" the master volume is missing... strange.

Today i have tried with a cvs snapshot from 8th may. To get the module to load i did the same as before but i additionally had to uncomment the lines:

Quoted 8 lines
if (ver1 != ver2) {
     snd_printk("CS4236+ chip detected, but control port 0x%lx is not
  valid\n", cport);
     snd_device_free(card, chip);
     return -ENODEV;
}

in cs4236_lib.c. Otherwise it would just always give that message in the log when loading the module. I now have the same result as before.

hmm... did rc1 work without this change?
then i may have brought a bug in the code...

Quoted 6 lines

In addition to the cs4236 card i also have a Terratec 128i (ESS Solo-1, snd-es1938.o) which is working perfectly with alsa.
The cs4236 is working correctly with OSS using the cs4232 driver.

I can supply more information on request like contents of /proc/isapnp and stuff like that. Just ask!

yes, could you attach the output of /proc/isapnp to make a patch?

Takashi

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]

#2 lore raw
Quoted 7 lines · Takashi Iwai
Quoted 7 lines

I'm having lots of problems getting the cs4236 driver to work. I started out with the 0.9.0rc1 package. The snd-cs4236.o module wouldn't load. It just resulted in a message like "kernel: CS4236+ soundcard not found or device busy" in the system log. Then i found out that the cs4236 driver was missing the pnp id of my card. I gathered the information from /proc/isapnp and added the line:
ISAPNP_CS4232('C','S','C',0xe936,0x0000,0x0010,0x0003),
to the list of pnpids in cs4236.c

Now the module could load, and I could even play some music... problem was now, that the sound wasn't audible. I turned up the volume for all channels in alsamixer and that actually made a difference. Now i could hear the music but extremely low. It is like the output is muted or something needs to be turned up. Also in a program like "kmix" the master volume is missing... strange.

I have solved the problem about missing audio by just unmuting "Master Digital" :-) I didn't know there was a muting function in alsamixer until i saw it mentioned in another mail on this list and i didn't need to unmute any channels on my other soundcard. There is still no master volume in kmix (and probably other oss sound mixers) however.

Quoted 10 lines
Quoted 8 lines

Today i have tried with a cvs snapshot from 8th may. To get the module to load i did the same as before but i additionally had to uncomment the lines:

if (ver1 != ver2) {
    snd_printk("CS4236+ chip detected, but control port 0x%lx is not
 valid\n", cport);
    snd_device_free(card, chip);
    return -ENODEV;
}

in cs4236_lib.c. Otherwise it would just always give that message in the log when loading the module. I now have the same result as before.

Quoted 2 lines

hmm... did rc1 work without this change?
then i may have brought a bug in the code...

I have found out that the cs4236_lib.c file did not change between rc1 and the cvs snapshot. It only happens sometimes that the module won't load because ver1 != ver2. When I loaded the module the first time today they were both 0, but after unloading it and loading it again ver1 was 0 and ver2 was 191. I don't know exactly when this problem appears. I will watch it a bit the next days and see if for instance the problems only occurs when reloading the module.

Quoted 2 lines
Quoted 1 line

I can supply more information on request like contents of /proc/isapnp and stuff like that. Just ask!

yes, could you attach the output of /proc/isapnp to make a patch?

/proc/isapnp:
Card 1 'CSCe936:CRD4236-1' PnP version 1.0 Product version 0.1
Logical device 0 'CSC0000:WSS/SB'

    Device is active
    Active port 0x534,0x388,0x220
    Active IRQ 5 [0x2]
    Active DMA 1,3
    Resources 0
      Priority preferred
      Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
      Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
      Port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding
      IRQ 5 High-Edge
      DMA 1 8-bit byte-count compatible
      DMA 0,3 8-bit byte-count compatible
      Alternate resources 0:1
        Priority acceptable
        Port 0x534-0x608, align 0xd3, size 0x4, 16-bit address decoding
        Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
        Port 0x220-0x260, align 0x1f, size 0x10, 16-bit address decoding
        IRQ 5,7,2/9,11,12,15 High-Edge
        DMA 1,3 8-bit byte-count compatible
        DMA 0,1,3 8-bit byte-count compatible
      Alternate resources 0:2
        Priority functional
        Port 0x534-0xffc, align 0x3, size 0x4, 16-bit address decoding
        Port 0x388-0x3f8, align 0x7, size 0x4, 16-bit address decoding
        Port 0x220-0x2e0, align 0x1f, size 0x10, 16-bit address decoding
        IRQ 5,7,2/9,11,12,15 High-Edge
        DMA 0,1,3 8-bit byte-count compatible
  Logical device 1 'CSC0001:GAME'
    Device is not active
    Resources 0
      Priority preferred
      Port 0x200-0x200, align 0x7, size 0x8, 16-bit address decoding
      Alternate resources 0:1
        Priority acceptable
        Port 0x208-0x208, align 0x7, size 0x8, 16-bit address decoding
  Logical device 2 'CSC0010:CTRL'
    Device is active
    Active port 0x110
    Resources 0
      Priority preferred
      Port 0x110-0x3f8, align 0x7, size 0x8, 16-bit address decoding
  Logical device 3 'CSC0003:MPU'
    Device is active
    Active port 0x330
    Active IRQ 9 [0x2]
    Resources 0
      Priority preferred
      Port 0x330-0x330, align 0x7, size 0x2, 16-bit address decoding
      IRQ 2/9 High-Edge
      Alternate resources 0:1
        Priority acceptable
        Port 0x330-0x360, align 0x7, size 0x2, 16-bit address decoding
        IRQ 2/9,11,12,15 High-Edge
      Alternate resources 0:2
        Priority functional
        Port 0x330-0x3e0, align 0x7, size 0x2, 16-bit address decoding

Patches:
*** cs4236.c.original Wed May 8 11:56:15 2002
--- cs4236.c Mon May 13 18:10:28 2002
***************
*** 264,269 ****
--- 264,271 ----

        ISAPNP_CS4232('C','S','C',0xf235,0x0000,0x0010,0x0003),
        /* CS4236B */
        ISAPNP_CS4232('C','S','C',0xf238,0x0000,0x0010,0x0003),
+       /* Some noname CS4236 based card */
+       ISAPNP_CS4232('C','S','C',0xe936,0x0000,0x0010,0x0003),
        /* --- */
        { ISAPNP_CARD_END, }    /* end */

};

*** cs4236_lib.c.original Thu Feb 14 18:40:32 2002
--- cs4236_lib.c Mon May 13 18:07:06 2002
***************
*** 297,307 ****

        ver1 = snd_cs4236_ctrl_in(chip, 1);
        ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
        snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 
0x%x\n", cport, ver1, ver2);
!       if (ver1 != ver2) {
                snd_printk("CS4236+ chip detected, but control port 
0x%lx is not valid\n", cport);
                snd_device_free(card, chip);
                return -ENODEV;
!       }
        snd_cs4236_ctrl_out(chip, 0, 0x00);
        snd_cs4236_ctrl_out(chip, 2, 0xff);
        snd_cs4236_ctrl_out(chip, 3, 0x00);
--- 297,308 ----
        ver1 = snd_cs4236_ctrl_in(chip, 1);
        ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
        snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 

0x%x\n", cport, ver1, ver2);
! snd_printk("TEST: ver1=%u ver2=%u\n", ver1, ver2);
! /* if (ver1 != ver2) {
snd_printk("CS4236+ chip detected, but control port

0x%lx is not valid\n", cport);
                snd_device_free(card, chip);
                return -ENODEV;
!       } */
        snd_cs4236_ctrl_out(chip, 0, 0x00);
        snd_cs4236_ctrl_out(chip, 2, 0xff);
        snd_cs4236_ctrl_out(chip, 3, 0x00);

Thomas Petersen

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]