Skip to contentSkip to conversation

ALSA Hammerfall DSP driver

DISCUSSION Marcus Andersson 1 participant 2 messages May 26, 2002 – Jun 16, 2002 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 6 lines · Paul Davis
Quoted 3 lines
# alsactl store 1
alsactl: get_control:359: Unknown control type: 6

have you updated your alsa-utils and alsa-lib? there was a new control type (64 bit integer) introduced for the H-DSP.

I removed everything alsa from my machine and reinstalled it. This error is now gone.

Quoted 5 lines
Quoted 3 lines

At some point the 'MIDI STATE out' is lit and stays lit. I don't use MIDI. (I think, if not aplay tries to play a wav as midi.)

Do you have any idea at what point this happens?

When I load a session in Ardour.

The first time I start alsa, I get errors from both aplay and jackd.

creating alsa driver ... hdsp|1024|2|44100|swmon
ALSA: no playback configurations available
ALSA: cannot configure capture channel
cannot load driver module alsa

I have to unload and reload alsa to get past this stage.

I wouldn't be too sure that it is something wrong with the hdsp driver. Too many weird things happen here. It would be interesting to know if someone else has a Multiface running.

Marcus

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

#2 lore raw
In reply to a message not in the archive

Hi,

my Multiface now works. I am not quite sure exactly what I did right, but I suspect it is that I now load snd_hammerfall_mem at boot time. I suspect some kind of faulty state is introduced if snd_hammerfall_mem isn't loaded in the correct way. This is impossible to correct later by unloading all the alsa modules and start over. Maybe it can be made a little more fault tolerant.

By the way, thanks for the driver!

Marcus

Quoted 25 lines · Paul Davis
Quoted 6 lines
Quoted 3 lines

i know its mundane, but are you sure you have the cables hooked up correctly?

I booted windows to check the setup, and it works.

Quoted 7 lines

you can set the passthru control

Quoted 4 lines

amixer cset name=Passthru 1

and check that passthru is working OK.

This doesn't work either.

OK, thats useful information. I wish I knew what it meant :) My best guess right now is that its something to do with the channel mapping; since the i/o configuration on the multiface is different, it may be that i need to change something about how we address certain channels.

Quoted 2 lines
# alsactl store 1
alsactl: get_control:359: Unknown control type: 6

have you updated your alsa-utils and alsa-lib? there was a new control type (64 bit integer) introduced for the H-DSP.

Quoted 6 lines
Quoted 2 lines

At some point the 'MIDI STATE out' is lit and stays lit. I don't use MIDI. (I think, if not aplay tries to play a wav as midi.)

Do you have any idea at what point this happens?

--p

_______________________________________________________________

Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/