-revised 2.5.21 lm_sensors support 1/5

@@ -45,5 +45,7 @@
    dep_tristate 'I2C device interface' CONFIG_I2C_CHARDEV $CONFIG_I2C
    dep_tristate 'I2C /proc interface (required for hardware sensors)' CONFIG_I2C_PROC $CONFIG_I2C $CONFIG_SYSCTL
 
+  source drivers/i2c/busses/Config.in
+  source drivers/i2c/chips/Config.in
 fi
 endmenu

@@ -16,6 +16,8 @@
 obj-$(CONFIG_ITE_I2C_ALGO)	+= i2c-algo-ite.o
 obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o
 obj-$(CONFIG_I2C_PROC)		+= i2c-proc.o
+obj-$(CONFIG_MAINBOARD)		+= busses/
+obj-$(CONFIG_SENSORS)		+= chips/
 
 # This is needed for automatic patch generation: sensors code starts here
 # This is needed for automatic patch generation: sensors code ends here

@@ -0,0 +1,32 @@
+#
+# Sensor device configuration
+# All depend on CONFIG_I2C_PROC.
+# ISA-only devices depend on CONFIG_I2C_ISA also.
+#
+
+if [ "$CONFIG_I2C" = "m" -o "$CONFIG_I2C" = "y" ] ; then
+if [ "$CONFIG_I2C_PROC" = "m" -o "$CONFIG_I2C_PROC" = "y" ] ; then
+  mainmenu_option next_comment
+  comment 'Hardware sensors mainboard support'
+  
+  dep_mbool 'Hardware sensors mainboard support' CONFIG_MAINBOARD $CONFIG_I2C $CONFIG_I2C_PROC
+  
+  if [ "$CONFIG_MAINBOARD" = "y" ]; then
+    tristate '  Acer Labs ALI 1535' CONFIG_I2C_ALI1535 
+    tristate '  Acer Labs ALI 1533 and 1543C' CONFIG_I2C_ALI15X3 
+    tristate '  AMD 756/766' CONFIG_I2C_AMD756
+    dep_tristate '  Apple Hydra Mac I/O' CONFIG_I2C_HYDRA $CONFIG_I2C_ALGOBIT
+    tristate '  Intel 82801AA, 82801AB and 82801BA' CONFIG_I2C_I801
+    dep_tristate '  Intel i810AA, i810AB and i815' CONFIG_I2C_I810 $CONFIG_I2C_ALGOBIT
+    tristate '  Pseudo ISA adapter (for some hardware sensors)' CONFIG_I2C_ISA 
+    tristate '  Intel 82371AB PIIX4(E), ServerWorks OSB4/CSB5' CONFIG_I2C_PIIX4
+    tristate '  SiS 5595' CONFIG_I2C_SIS5595
+    dep_tristate '  DEC Tsunami I2C interface' CONFIG_I2C_TSUNAMI $CONFIG_I2C_ALGOBIT
+    dep_tristate '  VIA Technologies, Inc. VT82C586B' CONFIG_I2C_VIA $CONFIG_I2C_ALGOBIT
+    tristate '  VIA Technologies, Inc. VT596A/B' CONFIG_I2C_VIAPRO
+    dep_tristate '  Voodoo3 I2C interface' CONFIG_I2C_VOODOO3 $CONFIG_I2C_ALGOBIT
+  fi
+endmenu
+fi
+fi
+

@@ -0,0 +1,27 @@
+#
+# Makefile for the kernel hardware sensors bus drivers.
+#
+
+MOD_LIST_NAME := SENSORS_BUS_MODULES
+
+export-objs	:= i2c-ali1535.o
+
+obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
+obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
+obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
+obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
+obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
+obj-$(CONFIG_I2C_I810)		+= i2c-i810.o
+obj-$(CONFIG_I2C_ISA)		+= i2c-isa.o
+obj-$(CONFIG_I2C_KEYWEST)	+= i2c-keywest.o
+obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
+ifeq ($(MACHINE),alpha)
+  obj-$(CONFIG_I2C_TSUNAMI)	+= i2c-tsunami.o
+endif
+obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
+obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
+obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
+
+
+include $(TOPDIR)/Rules.make

46 lines not on this page · raw message

@@ -0,0 +1,37 @@
+#
+# Makefile for the kernel hardware sensors chip drivers.
+#
+
+MOD_LIST_NAME := SENSORS_CHIPS_MODULES
+
+obj-$(CONFIG_SENSORS)		+= sensors.o
+obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
+obj-$(CONFIG_SENSORS_ADM1024)	+= adm1024.o
+obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
+obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
+obj-$(CONFIG_SENSORS_BT869)	+= bt869.o
+obj-$(CONFIG_SENSORS_DDCMON)	+= ddcmon.o
+obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
+obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
+obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
+obj-$(CONFIG_SENSORS_FSCSCY)	+= fscscy.o
+obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
+obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
+obj-$(CONFIG_SENSORS_ICSPLL)	+= icspll.o
+obj-$(CONFIG_SENSORS_IT87)	+= it87.o
+obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
+obj-$(CONFIG_SENSORS_LM78)	+= lm78.o
+obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
+obj-$(CONFIG_SENSORS_LM87)	+= lm87.o
+obj-$(CONFIG_SENSORS_LTC1710)	+= ltc1710.o
+obj-$(CONFIG_SENSORS_MATORB)	+= matorb.o
+obj-$(CONFIG_SENSORS_MAXILIFE)	+= maxilife.o
+obj-$(CONFIG_SENSORS_MTP008)	+= mtp008.o
+obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
+obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
+obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
+obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
+obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
+
+include $(TOPDIR)/Rules.make