- patch-kernel 2.4.18
PATCH 1/1 - patch-kernel 2.4.18
Added support for patching in the pre-release patches (dept. of redundancy dept.) to the kernel tree. Nothing major, but along the same lines as the -ac patch option (also works the same way, except for using -pre instead). Finally, if there is a discussion, could you please cc me directly since I'm not on the list.
Ciao,
Chris Baumbauer
patch-kernel Thu Jun 20 00:45:25 2002 renamed from patch-kernel.orig Thu Jun 20 00:37:30 2002 +0 -0
@@ -1,6 +1,6 @@
#! /bin/sh
# Script to apply kernel patches.
-# usage: patch-kernel [ sourcedir [ patchdir [ stopversion ] [ -acxx ] ] ]
+# usage: patch-kernel [ sourcedir [ patchdir [ stopversion ] [ -acxx ] [ -prexx ] ] ]
# The source directory defaults to /usr/src/linux, and the patch
# directory defaults to the current directory.
# e.g. @@ -41,18 +41,24 @@ # Added -ac option, use -ac or -ac9 (say) to stop at a particular version # Dave Gilbert <[email protected]>, 29th September 2001.
+# Added -pre option to work similar to the -ac option.
+# Chris Baumbauer <[email protected]>, 20th June 2002.
+
# Set directories from arguments, or use defaults. sourcedir=${1-/usr/src/linux}
patchdir=${2-.}
stopvers=${3-imnotaversion}
-# See if we have any -ac options
+# See if we have any -ac or -pre options
for PARM in $*
do
case $PARM in
-ac*)
gotac=$PARM;-
+ ;;
+ -pre*)
+ gotpre=$PARM;
+ ;;
esac;done
@@ -188,6 +194,50 @@
}
applyPatch patch-${CURRENTFULLVERSION}${gotac}
fi+elif [ x$gotpre != x ]; then
+ # Living dangerously with the -pre patches
+ # I know this is a direct rip from the -ac code, but it should be the same: in theory +
+ # Lets determine if this is our first -pre patch or if we've already included some in the past
+ if [ -f $patchdir/patch-${CURRENTFULLVERSION}-pre*\.* ]
+ then
+ PREVERSION=$CURRENTFULLVERSION
+ else
+ PREVERSION=$FULLVERSION
+ fi
+
+ # They could have done -pre (get latest) or -prexx where xx=version they want
+ if [ $gotpre == "-pre" ]
+ then
+ # They want the latest version
+ HIGHESTPATCH=0
+ for PATCHNAMES in $patchdir/patch-${PREVERSION}-pre*\.*
+ do
+ ACVALUE=`echo $PATCHNAMES | sed -e 's/^.*patch-[0-9.]*-pre\([0-9]*\).*/\1/'`
+ # Check it is actually a recognised patch type
+ findFile $patchdir/patch-${PREVERSION}-pre${ACVALUE} || break+
+ if [ $ACVALUE -gt $HIGHESTPATCH ]
+ then
+ HIGHESTPATCH=$ACVALUE
+ fi
+ done
+
+ if [ $HIGHESTPATCH -ne 0 ]
+ then
+ findFile $patchdir/patch-${PREVERSION}-pre${HIGHESTPATCH} || break
+ applyPatch patch-${PREVERSION}-pre${HIGHESTPATCH}
+ else
+ echo "No pre release patches found"
+ fi
+ else
+ # They want an exact version
+ findFile $patchdir/patch-${PREVERSION}${gotpre} || {
+ echo "Sorry, I couldn't find the $gotpre patch for $PREVERSION. Hohum."
+ exit 1
+ }
+ applyPatch patch-${PREVERSION}${gotpre}
+ fi
fi
Signature · 6 lines
------- Christopher A. Baumbauer [email protected], [email protected] There are 10 types of people in the world: Those who understand binary, and those who don't
A message that is not in the archive (sent off-list or not yet received): [email protected]
Grr, it showed up fine before I sent it (fameous last words), but I'll attempt to resend it.
Thanks,
Chris
Quoted 14 lines · Rolf Eike Beer
Von Christopher A. Baumbauer:
Quoted 4 lines
-# usage: patch-kernel [ sourcedir [ patchdir [ stopversion ] [ -acxx
] ] ]I don't think that this will work, your mailer did his own line breaks!
Eike
Signature · 6 lines
------- Christopher A. Baumbauer [email protected], [email protected] There are 10 types of people in the world: Those who understand binary, and those who don't
patch-kernel renamed from patch-kernel.orig +53 -3
@@ -1,6 +1,6 @@ #! /bin/sh # Script to apply kernel patches. -# usage: patch-kernel [ sourcedir [ patchdir [ stopversion ] [ -acxx ] ] ] +# usage: patch-kernel [ sourcedir [ patchdir [ stopversion ] [ -acxx ] [ -prexx ] ] ] # The source directory defaults to /usr/src/linux, and the patch # directory defaults to the current directory. # e.g.
@@ -41,18 +41,24 @@ # Added -ac option, use -ac or -ac9 (say) to stop at a particular version # Dave Gilbert <[email protected]>, 29th September 2001. +# Added -pre option to work similar to the -ac option. +# Chris Baumbauer <[email protected]>, 20th June 2002. + # Set directories from arguments, or use defaults. sourcedir=${1-/usr/src/linux} patchdir=${2-.} stopvers=${3-imnotaversion} -# See if we have any -ac options +# See if we have any -ac or -pre options for PARM in $* do case $PARM in -ac*) gotac=$PARM; - + ;; + -pre*) + gotpre=$PARM; + ;; esac; done
@@ -188,6 +194,50 @@ } applyPatch patch-${CURRENTFULLVERSION}${gotac} fi +elif [ x$gotpre != x ]; then + # Living dangerously with the -pre patches + # I know this is a direct rip from the -ac code, but it should be the same: in theory + + # Lets determine if this is our first -pre patch or if we've already included some in the past + if [ -f $patchdir/patch-${CURRENTFULLVERSION}-pre*\.* ] + then + PREVERSION=$CURRENTFULLVERSION + else + PREVERSION=$FULLVERSION + fi + + # They could have done -pre (get latest) or -prexx where xx=version they want + if [ $gotpre == "-pre" ] + then + # They want the latest version + HIGHESTPATCH=0 + for PATCHNAMES in $patchdir/patch-${PREVERSION}-pre*\.* + do + ACVALUE=`echo $PATCHNAMES | sed -e 's/^.*patch-[0-9.]*-pre\([0-9]*\).*/\1/'` + # Check it is actually a recognised patch type + findFile $patchdir/patch-${PREVERSION}-pre${ACVALUE} || break + + if [ $ACVALUE -gt $HIGHESTPATCH ] + then + HIGHESTPATCH=$ACVALUE + fi + done + + if [ $HIGHESTPATCH -ne 0 ] + then + findFile $patchdir/patch-${PREVERSION}-pre${HIGHESTPATCH} || break + applyPatch patch-${PREVERSION}-pre${HIGHESTPATCH} + else + echo "No pre release patches found" + fi + else + # They want an exact version + findFile $patchdir/patch-${PREVERSION}${gotpre} || { + echo "Sorry, I couldn't find the $gotpre patch for $PREVERSION. Hohum." + exit 1 + } + applyPatch patch-${PREVERSION}${gotpre} + fi fi