iptables problem with multible routes [sum]
Hi list,
I have aproblem originally posted to [email protected] maybe you guys can help me
---snip---
-------- Original Message --------
Subject: iptables problem with multible routes
Date: Fri, 05 Jul 2002 12:10:07 +0200
From: "Uwe A. P. Wuerdinger" <[email protected]>
Organization: X-tec Institute for Computer and network Security GmbH
Newsgroups: mailinglist.debian.firewall
Hi List,
I have a problem with iptables (kernel 2.4.18)
and multible routes.
Setup:
My Firewall (FW) has 3 interfaces
eth0 = Internal
eth1 = dedicatet router connection
ppp0 (PPPoE DSL link on eth2)
a kernel default route pointing to ppp0
an a second routingtable (me-prov) with an other default route pointing to the router connected to eth1.
I have a NAT rule in place for MASQing the networks on eth0. For the nat Traffic I mark my packets that should use the me-prov defaulttable with a 0x1
# iptables -t mangle -I PREROUTING 1 -p tcp -i eth0 --dport 22 \ -j MARK --set-mark 0x01
works like expected.
The packet gets NATed end send out to eth1.
My problem is when I do the same for localy generated packets (e.g. the mailserver running on the FW) with
# iptables -t mangle -I OUTPUT 1 -p tcp --dport 25 \ -j MARK --set-mark 0x01
The packed got routed out to eth1, as expected but has the Source IP of ppp0.
What can I do to get that packets the right source IP for eth1?
-------- Original Message --------
Subject: Re: iptables problem with multible routes
Date: Fri, 05 Jul 2002 12:36:12 +0200
From: "Uwe A. P. Wuerdinger" <[email protected]>
Organization: X-tec Institute for Computer and network Security GmbH
Newsgroups: mailinglist.debian.firewall
References: <[email protected]> <[email protected]>
Quoted 8 lines · Jean Christophe ANDRÃ0/00 wrote:
[email protected] écrivait :
Quoted 3 lines
The packed got routed out to eth1, as expected but has the Source IP of ppp0. What can I do to get that packets the right source IP for eth1
Check your NAT rule: you probably need to precise the output interface as "-o ppp0" to only NAT when it goes thought the DSL line.
NOP that would break the NATing of the internal traffic that should go out to eth1:
iptables -t mangle -I PREROUTING 4 -p tcp -i eth0 --dport 22 \
-j MARK --set-mark 0x01
---snip---
greets Uwe
Signature · 3 lines
X-Tec GmbH Institute for Computer and Network Security WWW : http://www.x-tec.de/