raid1 problems in 2.5.26 (maybe started at .1?)
I'm adding 2.5.26 to a stock redhat 7.3 distribution, which was installed with a raid1 root
filesystem on /dev/hda1 and /dev/hdb1.
This is on a Dell GX-260 w/256MB RAM, twin 20MB IDE hard drives.
The system boots 2.5.26, runs, resyncs the raid1 array, and then, just as the resync
finishes, the BUG at line 655 in drivers/md/raid1.c goes off:
if (waitqueue_active(&conf->wait_resume)) BUG();
There are no other raid arrays on the system.
I _seriously_ hesitate to simply comment out the bugcheck :-)
It seems that the 2.5.1 patch made wholesale changes to the raid1 subsystem...
Anyone ever seen anything like this? Have I missed something external to the
kernel that needs to be updated between 2.4.18 and 2.5.26?
Don't know if this will help or not but did you see the massive raid update in 2.5.27? You may want to try.
Quoted 35 lines · Roe Peterson
I'm adding 2.5.26 to a stock redhat 7.3 distribution, which was installed with a raid1 root
filesystem on/dev/hda1and/dev/hdb1.This is on a Dell GX-260 w/256MB RAM, twin 20MB IDE hard drives.
The system boots 2.5.26, runs, resyncs the raid1 array, and then, just as the resync
finishes, the BUG at line 655 indrivers/md/raid1.cgoes off:if (waitqueue_active(&conf->wait_resume)) BUG();There are no other raid arrays on the system.
I _seriously_ hesitate to simply comment out the bugcheck :-)
It seems that the 2.5.1 patch made wholesale changes to the raid1 subsystem...
Anyone ever seen anything like this? Have I missed something external to the
kernel that needs to be updated between 2.4.18 and 2.5.26?-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/